Owner manual

Page 14
RockLite™ Fab5 Manual Rev. A © 2013 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.)ThedefaultmodeforthextureisDMX,whichappearsasd001 on the LED readout. To select a
different DMX address, using the <MENU> button, select
Addr, then hit <ENTER>. Use the <UP/
DOWN> buttons to select the correct address, then press the <ENTER>buttonagaintoconrm.
Stand-Alone, Master/Slave, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Flash/Fade Mode:
1.)TosetthextureinFlashorFademode,select
FLAS or FAdE.Toconrm,pressthe
<ENTER> button.
2.)Now,selecttheashorfadespeedusing<UP/DOWN> buttons to reach
FL00 - FL15 or
FA00 - FA15 then hit <ENTER>.
* The speed adjustment settings range from 0 (fastest) to 15 (slowest).
Auto Mode:
1.)TousethextureinAutomaticMode,select
ASC-, then press the <ENTER> button.
2.) Now, select the speed using <UP/DOWN> buttons to reach
AC00 - AC15 then hit
<ENTER>toconrm.
* The speed adjustment settings range from 0 (fastest) to 15 (slowest).
Slave Mode:
1.)Tosetthextureasaslaveunit,select
SLAU, and hit <ENTER>. The unit will display SL.AU
to indicate that it is in slave mode.
Sound Active Mode:
1.) To use sound active mode, select
SouA, then press the <ENTER>buttontoconrm.
Standalone (Program) Mode:
Allows a single unit to display a variety of colors and programs without a DMX controller.
1.)Tosetthextureinmanualmode,selectPr--.Toconrm,pressthe<ENTER> button.
2.) Now, select the program by using the <UP/DOWN> buttons to select
Pr00-Pr35. To
conrm,pressthe<ENTER> button.
NOTE:
Pr00-Pr31 are static R/G/B/A/W colors + mixed colors. Pr32-Pr35 are four different
chase programs that are speed adjustable.
3.) To adjust the speed of these chases, navigate to
SP--, press the <ENTER> button. Now use
the <UP/DOWN> buttons to choose from
SP00 (fastest) to SP15 (slowest). Then press the
<ENTER>buttontoconrm.
Manual Color Adjustment:
Allowstheusertoadjustthecolorbalanceofthexture.Thesesettingsareglobal,theywilleffect
all modes.
1.) Use the <MENU> and <UP/DOWN> button to select
rL-- (Red Level), GL-- (Green Level),
bL-- (Blue Level), AL-- (Amber Level), or UL-- (White Level), then hit <ENTER>.
2.) Using the <UP/DOWN> buttons, select the maximum level for each color between x000-x255
(000=off), then hit <ENTER>toconrm.