rok spot CWWW Blizzard Lighting, LLC www.blizzardlighting.
TABLE OF CONTENTS RokSpot™ LED Pin Spot 1 1. Getting Started 3 What’s In The Box? 3 Getting It Out Of The Box 3 Powering Up! 3 Getting A Hold Of Us 3 Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4 2. Meet The RokSpot™ LED Pin Spot 5 Features 5 DMX Quick Reference 5 The RokSpot™ Pin-up Picture 6 3.
1. GETTING STARTED What’s In The Box? • 1 x RokSpot™ Professional LED Pin Spot • 1 x Rockin’ Power Cord • This Lovely User Manual Getting It Out Of The Box Congratulations on purchasing one of the most rockin’ little spot fixtures on the market today! Now that you’ve got your RokSpot™ (or hopefully, RokSpots!), you should carefully unpack the box and check the contents to ensure that all parts are present and in good condition.
SAFETY INSTRUCTIONS • Please keep this User Guide for future use. If you sell the unit to someone else, be sure that they also receive this User Guide. • ALWAYS make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture. • This product is intended for indoor use only. • To prevent risk of fire or shock, do not expose fixture to rain or moisture.
2.
Figure 1: The RokSpot™ Pin-Up Picture 1x OSRAM 2-in-1 CW-WW LED 4-button LED Control Panel Heavy Duty Cast Aluminum Enclosue Mounting Yoke with Adjustment/Locking Knobs Figure 2: The Rear Connections DMX In Menu Buttons AC Power Out RokSpot CWWW Manual Rev.
3. SETUP Fuse Replacement CAUTION! The RokSpot™ utilizes a high-output switch-mode power supply with an internal fuse. Under normal operating conditions, the fuse should not require replacement. The fuse is field replaceable, however it is an advanced procedure suited to qualified individuals. Should your RokSpot™ fuse require replacement, please contact Blizzard Lighting for instructions, or to return your unit for service.
Cable Connectors Cables must have a male XLR connector on one end and a female XLR connector on the other end. (Duh!) CAUTION: Do not allow contact between the common and the fixture’s chassis ground. Grounding the common can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify correct polarity and to make sure the pins are not grounded or shorted to the shield or each other.
Fixture Linking (Master/Slave Mode) 1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture. 2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the following fixture and so on.
4. OPERATING ADJUSTMENTS The Control Panel All the goodies and different modes possible with the RokSpot™ LED are accessed by using the control panel on the rear of the fixture. There are 4 control buttons below the LED display which allow you to navigate through the various control panel menus.
Control Panel Menu Structure Addr d001 - d512 To choose the DMX address SLAU SL.AU To run the fixture in slave mode CHnd 7CH 7 channel DMX mode 2CH 2 channel DMX mode 1CH 1 channel DMX mode SP -- SP00 -SP15 Speed adjustments (0-15) Pr -- Pr00 -Pr20 Built-in programs (0-20) ASC - AC00 -AC15 Auto mode (0-15) FAdE FA00 -FA15 Fade settings (0-15) FLAS FL00 -FL15 Flash / strobe speed (0-15) AL -- A.000 - r.255 Amber (2800k) dimmer (0% <--> 100%) UL -- U.000 - G.
DMX Mode Allows the unit to be controlled by any universal DMX controller. 1.) The default mode for the fixture is DMX, which appears as d001 on the LED Readout. To Addr,then hit . select a different DMX address, using the
DMX Values In-Depth (7-Channel Mode) Channel Value What It Does 1 000 <--> 255 Dimmer (0% <--> 100%) 2 000 <--> 255 Warm White Intensity (0% <--> 100%) 3 000 <--> 255 Cool White Intensity (0% <--> 100%) 000 014 028 042 056 070 084 098 112 126 140 154 168 182 196 210 224 238 252 CCT Adjustment (0% <--> 100%) 2800K Color Temperature 3000K Color Temperature 3200K Color Temperature 3500K Color Temperature 3800K Color Temperature 4000K Color Temperature 4200K Color Temperature 4500K Color Temperatur
DMX Values In-Depth (1-Channel Mode) Ch.
5. APPENDIX A Quick Lesson On DMX DMX (aka DMX-512) was created in 1986 by the United States Institute for Theatre Technology (USITT) as a standardized method for connecting lighting consoles to lighting dimmer modules. It was revised in 1990 and again in 2000 to allow more flexibility. The Entertainment Services and Technology Association (ESTA) has since assumed control over the DMX512 standard. It has also been approved and recognized for ANSI standard classification.
Keeping Your RokSpot™ As Good As New The fixture you’ve received is a rugged, tough piece of pro lighting equipment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed. You should absolutely keep the fixture clean, especially if you are using it in an environment with a lot of dust, fog, haze, wild animals, wild teenagers or spilled drinks.
Tech Specs! Weight & Dimensions Length 5.8 inches (146.5 mm) Width 5.2 inches (130 mm) Height 6.7 inches (169.6 mm) Weight 1.8 lbs (.8 kg) Power Operating Voltage 100-264VAC, 47-63HZ Power Consumption 15W, .23a, pf: .67 Light Source LED 1x 10W 2-in-1 LED 100,000 hours. Optical Beam Angle 8 degree optics standard Luminous Intensity Lux/m CW WW All 1m 20,290 11,170 26,930 2m 4,740 2,67 6,050 Thermal Max. Operating Temp.
This page has been intentionally left blank. Page 18 RokSpot CWWW Manual Rev.
This page has been intentionally left blank. Page 19 RokSpot CWWW Manual Rev.
Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting
