Owner manual
Page 13
BladeRunner™ White User Manual Rev. A (c) Copyright 2014 Blizzard Lighting, LLC
Manual Color Adjustments
Allows the user to adjust the intensity level of each individual moving head xture. You can set your own
intensity levels and then add PRO-Movement if you like! (See p. 12).
1.) Use the <MENU> button to scroll to COLOR, then use the <UP/DOWN> buttons to
display the White intensity levels for xtures 1, 2, 3, and 4. Push the <ENTER> button while
highlighting any to display the color intensity range settings from 000-255. Use the <UP/
DOWN> buttons to adjust the intensity, then push <ENTER> to conrm your choice.
2.) The last option in the COLOR submenu is Shut (strobe). Using the same steps as above,
you can adjust the strobe rate values from 000-255 (slow <--> fast).
Program Mode
Allows a single unit to display a variety of built-in programs without a DMX controller.
1.) Use the <MENU> button to scroll to PROGRAM, then use the <UP/DOWN> buttons to
display the built-in program number from 01-10. Push the <ENTER> to conrm your choice. If
you wish, you can then also enable/disable PRO-Movement, or adjust the Speed Settings of the
Movement or Color Macros. (See p. 12)
LCD Display
To turn on/off the backlit LCD display, use the <MENU> button to scroll to LED, then push
<ENTER>. Then use the <UP/DOWN> buttons to scroll or either ON or OFF, and push
<ENTER> button to conrm your choice. ON will leave the display illuminated constantly, and
OFF will turn the display off after 40 seconds of idle.
Version
This menu option simply displays the xtures installed rmware version number.
Reset
To automatically reset the motors to realign the moving head positions, use the <MENU>
button to scroll to RESET, then push <ENTER>.