Manual

Page 13

Manual Color Adjustment

Allows the user to adjust the color balance of each individual moving head xture. You can set your own

intensity levels and then add PRO-Movement if you like! (See p. 12).

1.) Use the <MENU> button to scroll to COLOR, then use the <UP/DOWN> buttons to display

any of Red, Green, Blue, or White settings for xtures 1, 2, 3, and 4. Push the <ENTER> button

while highlighting any to display the color intensity range settings from 000-255. Use the <UP/

DOWN> buttons to adjust the intensity, then push <ENTER> to conrm your choice.

2.) The last option in the COLOR submenu is Shut (strobe). Using the same steps as above,

you can adjust the strobe rate values from 000-255 (slow <--> fast).

Program Mode

Allows a single unit to display a variety of colors and programs without a DMX controller.

1.) Use the <MENU> button to scroll to PROGRAM, then use the <UP/DOWN> buttons to

display the built-in program number from 01-20. Push the <ENTER> to conrm your choice. If

you wish, you can then also enable/disable PRO-Movement, or adjust the Speed Settings of the

Movement or Color Macros. (See p. 12)

LCD Display

To turn on/off the backlit LCD display, use the <MENU> button to scroll to LED, then push

<ENTER>. Then use the <UP/DOWN> buttons to scroll or either ON or OFF, and push

<ENTER> button to conrm your choice. ON will leave the display illuminated constantly, and

OFF will turn the display off after 40 seconds of idle.

Version

This menu option simply displays the xtures installed rmware version number.

Reset

To automatically reset the motors to automatically realign the moving head positions, use the

<MENU> button to scroll to RESET, then push <ENTER>.