Manual

Page 11

4. OPERATING ADJUSTMENTS

The Control Panel

All the goodies and different modes possible with the BladeRunner™ RGBW are accessed

by using the control panel on the front of the xture. There are 4 control buttons below

the LCD display which allow you to navigate through the various control panel menus.

Main Menu

To navigate through the LCD control panel main menu, use the <MENU> button to scroll

through the various top level menu options. Then to scroll through sub-menu options, use

the <UP/DOWN> buttons. Push the <ENTER> button to save any changes made.

MENU ENTERDOWNUP

Control Panel Menu Structure

Address 001-512 DMX Address

CHND 14CH 14 Channel DMX Mode

32CH 32 Channel DMX Mode

AUTO STOP/RUN Auto Mode (slower color changing)

AUTO 1 STOP/RUN Auto Mode (faster color changing)

AUDIO STOP/RUN Sound Active Mode

COLOR Red 1 Head 1 - Red (0-255)

Green 1 Head 1 - Green (0-255)

Blue 1 Head 1 - Blue (0-255)

White 1 Head 1 - White (0-255)

Red 2 Head 2 - Red (0-255)

Green 2 Head 2 - Green (0-255)

Blue 2 Head 2 - Blue (0-255)

White 2 Head 2 - White (0-255)

Red 3 Head 3 - Red (0-255)

Green 3 Head 3 - Green (0-255)

Blue 3 Head 3 - Blue (0-255)

White 3 Head 3 - White (0-255)

Red 4 Head 4 - Red (0-255)

Green 4 Head 4 - Green (0-255)

Blue 4 Head 4 - Blue (0-255)

White 4 Head 4 - White (0-255)

Shut Strobe Rate (0-255)

PROGRAM 01-20 Built-in Programs

PRO-Movement ON/OFF Auto Movement On/Off

SPEED <ENTER> Speed Settings

Movement Movement Speed (001-255)

Color Color Speed (001-255)

LED ON/OFF LCD Backlight On/Off

VERSION V1.0.0 Firmware Version

RESET Yes? Fixture Reset