User guide

Page 13
Blade™ QFX User Manual Rev. A (c) 2013 Blizzard Lighting, LLC
Selecting A Fixture ID
TosetuporuseaxtureID,pushthe<MENU> button until you reach the DMX512
screen. Press the <ENTER> button once, and note that the digits located at the
bottomleftareunderlined.ThisisthextureID,anditsassignedstartingDMX
addressistotoright.TouseadifferentxtureID,pushthe<UP/DOWN> buttons to
until you reach your desired ID number.
Changing A Fixture ID Starting DMX Address
After you’ve reached your desired ID number, push the <ENTER> button once, and
you’ll notice that its assigned DMX address on the right is now underlined and ready
for editing. Use the <UP/DOWN> buttons to select your desired DMX address
anywhere from
001-255. Push <ENTER>conrm(Seepage12formoreinfo.)
DMX Mode Selection
Tousethextureineither13CH, or 25CH DMX channel mode, use the <UP/
DOWN> buttons to scroll to
Channel, and push the <ENTER> button. Next, use the
<UP/DOWN> buttons to scroll to either
13CH or 25CH. Then push the <ENTER>
buttontoconrmyourchoice
.
Sound Active Mode
Insoundactivemode,thexturewillreacttosound,chasingthroughthebuilt-in
programs. Tousethextureinsoundactivemode,usethe<UP/DOWN> buttons
to scroll to
Master Sound, then push the <ENTER> button. Next, use the <UP/
DOWN> buttons to select the microphone sensitivity level from
00 to 99 (high <-->
low). Then push the <ENTER>buttontoconrmyourchoice.
Auto Mode
Inautomode,thexturewillautomaticallychasethroughitsbuilt-inprograms.To
usethextureinautomode,usethe<UP/DOWN> buttons to scroll to
Master
Auto,
then push the <ENTER> button. Next, use the <UP/DOWN> buttons to
select the auto mode of your choice from
00 to 15. This will adjust the speed (fast
<--> slow). Then push the <ENTER>buttontoconrmyourchoice
.
Program Mode (Built-in Programs)
Tousethextureinprogrammode,usethe<UP/DOWN> buttons to scroll to
Master Prog, then push the <ENTER> button. Next, use the <UP/DOWN>
buttons to select the individual built-in program of your choice from
00 to 22. Then
push the <ENTER>buttontoconrmyourchoice
.
Fade Mode
To adjust the fade speed, use the <UP/DOWN> buttons to scroll to Master Fade,
then push the <ENTER> button. Next, use the <UP/DOWN> buttons to select the
fade rate of speed from
00 to 15 (fast <--> slow). Then push the <ENTER> button
toconrmyourchoice
.