Instruction Manual

Page 7
AutoBahn™ 8 User Manual - Rev. A (c) 2014 Blizzard Lighting, LLC
SETTING THE NETMASK:
This allows you to choose from the 3 commonly used network mask
congurationsthatyoucanchangeperyoursystemrequirements.
Enterthemainmenubypressingthe<MENU> button, then use
the <UP/DOWN> buttons to highlight “3. Set Netmask”. Press
the <ENTER> button. Then use the <UP/DOWN> buttons to scroll
through the 3 choices and push the <ENTER> button when your
selection is highlighted.
Tonishsettingthenetmask,youmustsave your changes by using
the <UP/DOWN> buttons to scroll to “Enter”, and then push the
<ENTER> button.
DMX PORT SETTINGS:
Enterthemainmenubypressingthe<MENU> button, then use
the <UP/DOWN> buttons to highlight “4. Set DMX Port”. Press
the <ENTER> button. Then use the <UP/DOWN> buttons to scroll
through the DMX in/out port selections and push the <ENTER> button
when highlighted.
1.) DMXIN Port A/B
DMX IN Port A/B can be set as “input” or “disabled” status. “Univ”
(Universe), can be set within the range 0.0 - F.F. When the DMX Port is
set as “input”, the Port Mode can be set as “normal” or “Backup”.
For all of the DMX Port Settings on page 8, use the <UP/DOWN>
buttons to scroll through your choices, and push the <ENTER> button
toconrm.Repeatthisprocessforeachgroupasnecessary.