Instruction Manual

Page 10
AutoBahn™ 8 User Manual - Rev. A (c) 2014 Blizzard Lighting, LLC
USER PRESETS:
Enterthemainmenubypressingthe<MENU> button, then use
the <UP/DOWN> buttons to highlight “7. User Preset”. Press the
<ENTER> button.
The built-in user presets will help you to use the device easily and
avoid complicated setup procedures. You can simply choose the
presets by using the <UP/DOWN> buttons to scroll through your
choices, then pushing the <ENTER> buttontoconrm.Presets1,2,
and 3 settings are the inherited DMX Port Settings. (See p. 7-8)
Thereare5differentuserpresets+factorysettingsrestore:
1.) 2 In 1 Backup Mode = When one DMX input port is not sending a
signal, it will use the DMX signal from the other input.
2.) 2 In 1 HTP Mode = Compares your designated input signals and
outputs the one with higher value to the network.
3.) 2 In 1 LTP Mode = Compares your designated input signals and
outputs the latest to the network.
4.) DMX Splitter 1-4 Mode = DMX IN A signal outputs to DMX out
ports1-4;DMXINBsignaloutputstoDMXoutports5-8.
5.) Isolated Mode = Isolates the DMX Input and Output ports. No
signals from Input ports are passed to the Output ports. The Output
ports receive DMX signals directly from the network individually.
6.) Factory Setting = All settings including the Device Name, Device
ID, and Device IP will be restored to the original factory settings.