Owner's manual

ManualsBrandsBlizzard Lighting ManualsLightingAurora LED DJ Effect

Blizzard Lighting, LLC

www.blizzardlighting.com

Brookﬁ eld, WI USA

Page 2

TABLE OF CONTENTS

Aurora™ LED Effect Light 1

1. Getting Started 3

What’s In The Box? 3

Getting It Out Of The Box 3

Powering Up! 3

Getting A Hold Of Us 3

Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4

2. Meet The Aurora™ 5

Features 5

DIP Switch Settings 5

DMX Channel Functions 5

3. Setup 6

Fuse Replacement 6

Connecting A Bunch Of Aurora™ 6

Data/DMX Cables 6

Cable Connectors 7

3-Pin??? 5-Pin??? Huh? 7

Take It To The Next Level: Setting up DMX Control 7

Fixture Linking (Master/Slave Mode) 8

Mounting/Rigging 8

Troubleshooting 9

Keeping Your Polaris Spot As Good As New 10

Returns (Gasp!) 10

Shipping Issues 10

Tech Specs 11

Summary of content (6 pages)

PAGE 1
TABLE OF CONTENTS Aurora™ LED Effect Light 1 1. Getting Started 3 What’s In The Box? Getting It Out Of The Box Powering Up! Getting A Hold Of Us Safety Instructions (Don’t Stick Your Hand In The Toaster!) 2. Meet The Aurora™ 3 3 3 3 4 5 Features DIP Switch Settings DMX Channel Functions 5 5 5 3.
PAGE 2
1. GETTING STARTED SAFETY INSTRUCTIONS What’s In The Box? • • • • 1 x Aurora™ LED Effect Light An Ever-So-Handy Power Cord A Mounting Bracket & Knobs This Lovely User Manual Getting It Out Of The Box Congratulations on purchasing a great LED effect light! Now that you’ve got your Aurora, you should carefully unpack the box and check the contents to ensure that all parts are present and in good condition.
PAGE 3
2. MEET THE AURORA™ EFFECT LIGHT 3. SETUP CONTROL FEATURES • • • • 6-channel LED DMX Effect Light Variable electronic strobe Built-in automated programs Built-in sound activated programs ADDITIONAL FEATURES Fuse Replacement • • With a flat head screwdriver, wedge the fuse holder out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power.
PAGE 4
Cable Connectors Cables must have a male XLR connector on one end and a female XLR connector on the other end. (Duh!) Fixture Linking (Master/Slave Mode) 1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture. 2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector.
PAGE 5
Troubleshooting Keeping Your Aurora As Good As New Symptom Solution Fixture AutoShut Off Check the fan in the fixture. If it is stopped or moving slower than normal, the unit may have shut itself off due to high heat. This is to protect the fixture from overheating. Clear the fan of obstructions, or return the unit for service. The fixture you’ve received is a rugged, tough piece of pro lighting equipment, and as long as you take care of it, it will take care of you.
PAGE 6
Tech Specs! Weight & Dimensions Length 10.25 inches (260 mm) Width 10.25 inches (260 mm) Height 9.5 inches (240 mm) Weight 5.5 lbs (2.5 kg) Power Operating Voltage 110-240VAC, 50-60 Hertz (autoranging) Fuse 1A 250V Power Consumption 30W @ 120V Light Source LED 1x9W Tri-Color (RGB) LED, 100,000 Hours Thermal Max. Operating Temp.