HUSHPAR Infiniwhite 500 Blizzard Lighting, LLC www.blizzardlighting.
TABLE OF CONTENTS HushPar™ Infiniwhite 500 1 1. Getting Started 3 What’s In The Box? 3 Getting It Out Of The Box 3 Powering Up! 3 Getting A Hold Of Us 3 Safety Instructions (Don’t Stick Your Hand In The Toaster!) 4 2. Meet The HushPar™ Infiniwhite 500 5 Features DMX Quick Reference The HushPar™ Infiniwhite 500 Pin-up Picture 5 5 6 3.
1. GETTING STARTED What’s In The Box? • 1 x HushPar™ Infiniwhite 500 Professional LED PAR Fixture • This Lovely User Manual Getting It Out Of The Box Congratulations on purchasing one of the most rocking box-shaped PAR fixtures anywhere! Now that you’ve got your HushPar™ Infiniwhite 500 (or hopefully, HushPares!), you should carefully unpack the box and check the contents to ensure that all parts are present and in good condition.
SAFETY INSTRUCTIONS • Please keep this User Guide for future use. If you sell the unit to someone else, be sure that they also receive this User Guide. • ALWAYS make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture. • This product is intended for indoor use only. • To prevent risk of fire or shock, do not expose fixture to rain or moisture.
2.
Figure 1: The HushPar™ Infiniwhite 500 Pin-Up Picture High Power 5w 3-in-1 LEDs Heavy-duty Die Cast Aluminum Enclosure Locking Knobs Dual Mounting Brackets Figure 2: The Rear Connections DMX In DMX Out LED Display Menu Buttons HushPar Infiniwhite Manual Rev.
3. SETUP Fuse Replacement CAUTION! The HushPar™ Infiniwhite 500 utilizes a high-output switch-mode power supply with an internal fuse. Under normal operating conditions, the fuse should not require replacement. The fuse is field replaceable, however it is an advanced procedure suited to qualified individuals. Should your HushPar™ Infiniwhite 500 fuse require replacement, please contact Blizzard Lighting for instructions, or to return your unit for service.
Cable Connectors Cables must have a male XLR connector on one end and a female XLR connector on the other end. (Duh!) CAUTION: Do not allow contact between the common and the fixture’s chassis ground. Grounding the common can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify correct polarity and to make sure the pins are not grounded or shorted to the shield or each other.
Fixture Linking (Master/Slave Mode) 1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture. 2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the following fixture and so on.
4. OPERATING ADJUSTMENTS The Control Panel All the goodies and different modes possible with the HushPar™ Infiniwhite 500 LED are accessed by using the control panel on the rear of the fixture. There are 4 control buttons below the LED display which allow you to navigate through the various control panel menus.
Control Panel Menu Structure Addr d001 - d512 To choose the DMX address SLAU SL.AU To run the fixture in slave mode CHnd 8CH 8 channel DMX mode 7CH 7 channel DMX mode 6CH 6 channel DMX mode 3CH 3 channel DMX mode SP -- SP00 -SP15 Speed adjustments (0-15) Pr -- Pr00 -Pr15 Built-in programs (0-15) ASC - AC00 -AC15 Auto mode (0-15) FAdE FA00 -FA15 Fade settings (0-15) FLAS FL00 -FL15 Flash / strobe speed (0-15) rL -- r.000 - r.
DMX Mode Allows the unit to be controlled by any universal DMX controller. 1.) The default mode for the fixture is DMX, which appears as d001 on the LED Readout. To Addr,then hit . select a different DMX address, using the
DMX Values In-Depth (8-Channel Mode) Channel Value What It Does 1 000 <--> 255 Dimmer (0% <--> 100%) 2 000 <--> 255 Amber Intensity (0% <--> 100%) 3 000 <--> 255 Warm White Intensity (0% <--> 100%) 4 000 <--> 255 Cool White Intensity (0% <--> 100%) 000 <--> 014 015 <--> 255 Strobe Dimming Strobe (Slow <--> Fast) 000 032 064 096 128 160 192 224 <--> <--> <--> <--> <--> <--> <--> <--> 031 063 095 127 159 191 223 255 Fade, Color Change, Sound Active No Function Fade In (Ch.
DMX Values In-Depth (7-Channel Mode, Continued) Channel 6 7 Ch. 1 Controls Saturation Value What It Does 000 032 064 096 128 160 192 224 <--> <--> <--> <--> <--> <--> <--> <--> 031 063 095 127 159 191 223 255 Fade, Color Change, Sound Active No Function Fade In (Ch. 5 Controls Speed) Fade Out (Ch. 5 Controls Speed) Fade In / Fade Out (Ch. 5 Controls Speed) ACW Gradual Change (Ch. 5 Controls Speed) Fade In / Fade Out, Auto Run Color Jump (Ch.
DMX Values In-Depth (3-Channel ACW Mode) Ch. Value What It Does (3 Ch.) 1 000 <--> 255 Amber Intensity (0% <--> 100%) 2 000 <--> 255 Warm White Intensity (0% <--> 100%) 3 000 <--> 255 Cool White Intensity (0% <--> 100%) Troubleshooting Symptom Solution Fixture Auto-Shut Off Check the fan in the fixture. If it is stopped or moving slower than normal, the unit may have shut itself off due to high heat. This is to protect the fixture from overheating.
5. APPENDIX A Quick Lesson On DMX DMX (aka DMX-512) was created in 1986 by the United States Institute for Theatre Technology (USITT) as a standardized method for connecting lighting consoles to lighting dimmer modules. It was revised in 1990 and again in 2000 to allow more flexibility. The Entertainment Services and Technology Association (ESTA) has since assumed control over the DMX512 standard. It has also been approved and recognized for ANSI standard classification.
Keeping Your HushPar™ Infiniwhite 500 As Good As New The fixture you’ve received is a rugged, tough piece of pro lighting equipment, and as long as you take care of it, it will take care of you. That said, like anything, you’ll need to take care of it if you want it to operate as designed. You should absolutely keep the fixture clean, especially if you are using it in an environment with a lot of dust, fog, haze, wild animals, wild teenagers or spilled drinks.
Tech Specs! Weight & Dimensions Length 13 inches (33 cm) Width 12.6 inches (32 cm) Height 15.4 inches (39 cm) Weight 12.1 pounds (5.5 kg) Power Operating Voltage 100-264VAC, 47-63 Hertz Fuse 3A 250V Power Consumption 90W Light Source LED 18x 5W 3-in-1 LEDs 100,000 hours. Optical Beam Angle 25 degree optics Thermal Max. Operating Temp.
This page left intentionally blank HushPar Infiniwhite Manual Rev.
Enjoy your product! Our sincerest thanks for your purchase! --The team @ Blizzard Lighting
