Owner's manual
Page 16
HotStik™ 5 COB User Manual - Rev. A (c) 2014 Blizzard Lighting, LLC
Troubleshooting
Symptom Solution
Beam is Dim Check optical system and clean excess dust/grime. Also
ensure that the 220V/110V switch is in the correct position,
if applicable.
No Light Output Checktoensurextureisoperatingundercorrectmode,
IEauto/DMX/Etc.,ifapplicable.Contactserviceformore
information.
Chase Speed
Too Fast/Slow
Checktoensurepropersetupofspeedadjustment.
No Power Check fuse, AC cord and circuit for malfunction.
Blown Fuse Check AC cord and circuit for damage, verify that moving
parts are not restricted and that unit’s ventilation is not
obstructed
Fixture Not
Responding /
RespondingEr-
raticly
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Resetxture(s).
If your problem isn’t listed, or if problems persist,
please contact support: support@blizzardlighting.com.
1084 mm (42.7 in)
1000 mm (39.4 in)
125 mm
(4.92 in)
138 mm
(5.43 in)