Manual

ManualsBrandsBlizzard Lighting ManualsLighting300 HushPar Infiniwhite

Page 12

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.) The default mode for the xture is DMX, which appears as

Addr on the LED readout. To

select a different DMX address, hit the <ENTER> button and use the <UP/DOWN> buttons

to select the correct address, then hit <ENTER> to conrm.

Master/Slave, Sound Active, Auto Modes:

Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.

Master/Slave Mode:

1.) To use your HushPAR Inniwhite™ 300 xtures in Master/Slave mode: use standard DMX

cables to daisy chain your units together via the DMX in/out connectors on the rear of the

units. The rst xture after the controller in the chain is the master. Any xture thereafter will

automatically be set to slave, and wil function as the master unit does.

Sound Active Modes:

1.) To use Sound Active Mode 1 (color ash), use the

<UP/DOWN> buttons to select SoUF,

then press the <ENTER> button to conrm.

2.) To use Sound Active Mode 2 (color jump), use the

<UP/DOWN> buttons to select SoUA

then press the <ENTER> button to conrm.

Built-in Programs:

1.) There are 16 built-in programs. Use the

<UP/DOWN> buttons to select Pr--, then press

the <ENTER> button. Then use the

<UP/DOWN> buttons again to choose Pr00-Pr15, then

press the <ENTER> button.

Pr00-Pr06 are 7 built-in static colors, Pr07-Pr13 are 7 built-in

strobe colors,

Pr14 is 3-color jump, and Pr15 is 7-color jump.

2.) To adjust the speed of the built-in programs, use the

<UP/DOWN> buttons to select SP--,

then press the <ENTER> button. Then use the <UP/DOWN> buttons to select SP00-SP15

(fast <-> slow).

Auto Mode:

1.) To use the xture in Auto Mode, use the

<UP/DOWN> buttons to select ASC-, then press

the <ENTER> button. Then use the

<UP/DOWN> buttons to select AS00-AS15 (fast <->

slow).

Flash (Strobe) Mode:

1.) To use the xture in Flash Mode, use the

<UP/DOWN> buttons to select FLAS, then press

the <ENTER> button. Then use the

<UP/DOWN> buttons to select FL00-FL15 (fast <->

slow).

Fade Mode:

1.) To use the xture in Fade Mode, use the

<UP/DOWN> buttons to select FAdE, then press

the <ENTER> button. Then use the

<UP/DOWN> buttons to select FA00-FA15 (fast <->

slow).

Manual Color Adjustment:

Allows the user to adjust the color balance of the xture.

1.) Use the <UP/DOWN> buttons to scroll to either

rL (amber), gL (cool white), or bL

(warm white), and press <ENTER>. Select the maximum level for each color between 0-255

(0=off), then hit <ENTER> to conrm.