Manual

Page 14

Troubleshooting

Symptom Solution

Beam is Dim Check optical system and clean excess dust/grime. Also ensure that

the 220V/110V switch is in the correct position, if applicable.

No Light Output Checktoensurextureisoperatingundercorrectmode,IEauto/

DMX/Etc.,ifapplicable.Contactserviceformoreinformation.

Chase Speed Too

Fast/Slow

Check to ensure proper setup of speed adjustment.

No Power Check fuse, AC cord and circuit for malfunction.

Blown Fuse Check AC cord and circuit for damage, verify that moving parts are

not restricted and that unit’s ventilation is not obstructed

Fixture Not

Responding /

RespondingEr-

ratically

Make sure all connectors are seated properly and securely.

Use Only DMX Cables.

Install a Terminator.

Check all cables for defects.

Resetxture(s).

If your problem isn’t listed, or if problems persist,

please contact support: support@blizzardlighting.com.

DMX Values In-Depth (9-Channel Mode)

Channel Value What It Does

1 000 <--> 255 First Red Pixel Intensity (0% <--> 100%)

2 000 <--> 255 First Green Pixel Intensity (0% <--> 100%)

3 000 <--> 255 First Blue Pixel Intensity (0% <--> 100%)

4 000 <--> 255 Second Red Pixel Intensity (0% <--> 100%)

5 000 <--> 255 Second Green Pixel Intensity (0% <--> 100%)

6 000 <--> 255 Second Blue Pixel Intensity (0% <--> 100%)

7 000 <--> 255 Third Red Pixel Intensity (0% <--> 100%)

8 000 <--> 255 Third Green Pixel Intensity (0% <--> 100%)

9 000 <--> 255 Third Blue Pixel Intensity (0% <--> 100%)

DMX Values In-Depth (5-Channel Mode)

Channel Value What It Does

1 000 <--> 255 Dimmer (0% <--> 100%)

2 000 <--> 255 Red Intensity (0% <--> 100%)

3 000 <--> 255 Green Intensity (0% <--> 100%)

4 000 <--> 255 Blue Intensity (0% <--> 100%)

5 000 <--> 255 Strobe (Slow <--> Fast)

DMX Values In-Depth (3-Channel Mode)

Channel Value What It Does

1 000 <--> 255 Red Intensity (0% <--> 100%)

2 000 <--> 255 Green Intensity (0% <--> 100%)

3 000 <--> 255 Blue Intensity (0% <--> 100%)