Manual

Page 12
ToughSTORM™ 252 Manual - Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.)ThedefaultstartingDMXaddressforthextureis
A001 on the LEDreadout.Toselectadifferent
starting DMX address, press the <MENU> button, and then use the <UP/DOWN> buttons to navigate to
Addr, and press the <ENTER> button. Then use the <UP/DOWN> buttons to select the starting address
you wish to use, and press the <ENTER>buttontoconrmyoutchoice.
2.) To select which channel mode you would like to use, press the <MENU> button, and then use the
<UP/DOWN> buttons to navigate to
CHnd and press the <MENU> button, and then use the <UP/
DOWN> to select tour choice of either 3/5/9/13 or 14-channel modes. Press the <ENTER> button to
conrmyourchoice.
Stand-Alone, Master/Slave Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Flash/Strobe
1.)Toadjusttheashsetting(strobe), navigate to
FLAS and press the <ENTER> button.
2.)Thentoadjusttheashspeedusethe<UP/DOWN> buttons to select from
FL00 (fastest) to
FL15 (slowest). Press the <ENTER>buttontoconrmyourchoice.
Color Fade
1.) To adjust the fade settings, navigate to
FAdE and press the <ENTER> button.
2.) Then to adjust the fade speed use the <UP/DOWN> buttons to select from
FA00 (fastest) to
FA15 (slowest). Press the <ENTER>buttontoconrmyourchoice.
Auto Mode
1.)Tousethextureinautomaticmode,navigateto
ASC- and press the <ENTER> button.
2.) Then to adjust the speed use the <UP/DOWN> buttons to select from
AC00 (fastest) to AC15
(slowest). Press the <ENTER>buttontoconrmyourchoice.
Standalone (Program) Mode:
Allows a single unit to display a variety of colors and programs without a DMX controller.
1.) To use the built-in programs, navigate to
Pr-- and press the <ENTER> button.
2.) Then to select a program use the UP/DOWN buttons to select from
Pr00 to Pr15. Press the <EN-
TER>buttontoconrmyourchoice.
3.) You can then adjust the speed of the chase by pressing the <MENU> button, and then use the <UP/
DOWN> buttons to navigate to
SP-- and press the <ENTER> button. Then use then <UP/DOWN>
buttons to select from
SP00 (fastest) to SP15 (slowest). Press the <ENTER>buttontoconrm.
Program #0: Red, Full Bar
Program #1: Green, Full Bar
Program #2: Blue, Full Bar
Program #3: Yellow, Full Bar
Program #4:Aqua,FullBar
Program #5: Magenta, Full Bar
Program #6: White, Full Bar
Program #7:Red+Magenta,3-PixelEffect
Program #8:Multi-ColorFullBar,FadeEffect
Program #9:Green+Yellow,3-PixelEffect
Program #10:Magenta+Green,3-PixelEffect
Program #11:Multi-Color3-PixelEffect
Program #12:Red,Green,Blue3-PixelEffect
Program #13:Red,Green,Magenta3-PixelEffect
Program #14:Yellow,Magenta,Aqua3-PixelEffect
Program #15: All Program Chase
Slave Mode
1.)Tosetthextureasaslaveunit,navigateto
SLAU, and hit <ENTER>. The menu display will then
display
SL-U. Press the <ENTER>buttontoconrmyourchoice.