Owner manual

Page 12
HushPAR InniWhite 100 Manual Rev. A Copyright © 2013 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default mode for the xture is DMX, which appears as
Addr on the LED readout. To
select a different DMX address, hit the <ENTER> button and use the <UP/DOWN> buttons
to select the correct address, then hit <ENTER> to conrm.
Master/Slave and Auto Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Master/Slave Mode:
1.) To use your HushPAR Inniwhite™ 300 xtures in Master/Slave mode: use standard DMX
cables to daisy chain your units together via the DMX in/out connectors on the rear of the
units. The rst xture after the controller in the chain is the master. Any xture thereafter will
automatically be set to slave, and wil function as the master unit does.
Built-in Programs:
1.) There are 16 built-in programs. Use the
<UP/DOWN> buttons to select Pr--, then press
the <ENTER> button. Then use the
<UP/DOWN> buttons again to choose Pr00-Pr15, then
press the <ENTER> button.
Pr00-Pr06 are 7 built-in static colors, Pr07-Pr13 are 7 built-in
strobe colors,
Pr14 is 3-color jump, and Pr15 is 7-color jump.
2.) To adjust the speed of the built-in programs, use the
<UP/DOWN> buttons to select SP--,
then press the <ENTER> button. Then use the <UP/DOWN> buttons to select SP00-SP15
(fast <-> slow).
Auto Mode:
1.) To use the xture in Auto Mode, use the
<UP/DOWN> buttons to select ASC-, then press
the <ENTER> button. Then use the
<UP/DOWN> buttons to select AS00-AS15 (fast <->
slow).
Flash (Strobe) Mode:
1.) To use the xture in Flash Mode, use the
<UP/DOWN> buttons to select FLAS, then press
the <ENTER> button. Then use the
<UP/DOWN> buttons to select FL00-FL15 (fast <->
slow).
Fade Mode:
1.) To use the xture in Fade Mode, use the
<UP/DOWN> buttons to select FAdE, then press
the <ENTER> button. Then use the
<UP/DOWN> buttons to select FA00-FA15 (fast <->
slow).
Manual Color Adjustment:
Allows the user to adjust the color balance of the xture.
1.) Use the <UP/DOWN> buttons to scroll to either
rL (amber), gL (cool white), or bL
(warm white), and press <ENTER>. Select the maximum level for each color between 0-255
(0=off), then hit <ENTER> to conrm.