User Manual

4. Removal of genuine components.

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No parts of this manual may be

reproduced, stored in retrieval systems, or transmitted in any way without prior written permission of Blitz Co., Ltd. (Japan).

Circuit opening relay

Junctions Block (Fuse Box)

Engine under cover

(1) Operation to prevent the spillage of fuel.

① Remove the circuit opening relay from the

junction block in the engine room.

②Start the engine, wait until it shuts off it self

then turn OFF the ignition.

③Remove the negative terminal of the battery.

④Reinstall the circuit opening relay.

⑤Release the pressure from the fuel tank by

removing the fuel tank cap.

(2) Remove the engine under cover.

(3) Drain the engine oil by removing the drain

bolt.

(4) Drain the engine coolant.

(5) Remove the apron seal cover.

(6) Remove the cylinder head cover by loosening

the bolts (4P).

Apron seal cover

Cylinder head cover seal

Online Manual Not For Resale Purposes