Owner's manual
WARNING SCRAMBLE
- The Blitz SBC I-D incorporates an advanced warning and limiter - Scramble boost allows the user to set an increase or decrease
function The function allows the user to preset warning and preset
amount of boost for a desired time
f
unct
i
on.
Th
e
f
unct
i
on a
ll
ows t
h
e user to preset warn
i
ng an
d
preset amount o
f
b
oost
f
or a
d
es
i
re
d
t
i
me.
the amount of boost reduction.
1 To set, press MENU button, scroll down to SCRAMBLE and press
1 To set, press MENU button, scroll down to WARNING and press enter to select.
enter to select. 2 To select function, scroll down and press enter.
2 To select function, scroll down and press enter. The function will be highlighted, scroll to select or set
gg
The function will be highlighted, scroll to select or set different setting.
different setting.
SCRAMBLE
WARNING
TIME [ SEC ] OFF
WARNING
ON
CHANNEL
CH4
WARNING
ON
CHANNEL
CH4
BUZZER ON
BOOST 1.0
LIMITER 10
TIME
TIME
WARNING - Scramble boost operates by TIME (seconds); if left off, scramble
- Allows the user to turn warning on or off. Buzzer and boost will not operate.
Limiter will not work unless warning function is on - Time is set from 1-99 seconds
- The LCD backlight will turn red if boost exceeds warning setting - Scramble boost is operated by throttle response, scramble will
automatically.
y
BUZZER
- Allows the user to choose to turn buzzer off, the unit will not beep CHANNEL
if the buzzer function is turned off. - To set scramble boost pressure, choose a designated channel that is
only going to be use for scramble boost. Set boost pressure as
BOOST desired.
-
T
o
set
boost
w
a
rnin
g
l
e
v
e
l.
Ca
n
be
set
in k
g/c
m2
,
k
pa,
BAR
a
n
d
P
S
I. Ex
a
m
p
l
e
:
C
h
a
nn
e
l 1 i
s
set
at
1
5
ps
i
,
a
n
d
w
a
n
t
to
set
sc
r
a
m
b
l
e
boost
-
To
set
boost
warning
level
.
Can
be
set
in
kg/cm
2
,
kpa
,
BAR
and
PSI
.
Example:
Channel
1
is
set
at
15
psi
,
and
want
to
set
scramble
boost
at 20 psi. Choose designated channel, in this case use Channel 4,
LIMITE
R
set to 20 psi. Go to scramble setting and set Time to 3 seconds,
- This function is a boost reduction function. Limiter will turn on exit Scramble setting and return to Channel 1 display. Drive vehicle
automatically if boost level exceeds the warning setting. in Channel 1 boost setting, boost will automatically jump to Channel
- Limiter is set in boost ratio 4 (which is set at 20 psi) for 3 seconds, then it will return back to
ex 0 = no boost reduction
Channel 1 This will continued every gear until the scramble boost
ex.
0
= no
b
oos
t
re
d
uc
ti
on
Ch
anne
l
1
.
Thi
s w
ill
con
ti
nue
d
every gear un
til
th
e scram
bl
e
b
oos
t
99 = will reduce boost back to stock is turn off.
- Recommended setting 7-10
Page 7
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes