User Manual

2. MAIN MENU (Main Menu) List

(1) It is the item table of the MAIN MENU.

ＭＡＩＮＭＡＮＵ (English) ＭＡＩＮＭＡＮＵ (Japanese) Operation after the selection

ＮＥＥＤＬＥＭＥＴＥＲシシンメーター It moves to the needle meter monitoring data display.

ＥＬＬＩＰＳＥＭＥＴＥＲダエンメーター It moves to the ellipse meter monitoring data display.

ＢＡＲＧＲＡＰＨバーグラフ It moves to the bar graph monitoring data display.

２Ｄ・３ＤＴＲＡＣＥ２Ｄ・３Ｄトレース It moves to the 2D・3D display.

ＴＡＣＨＯＭＡＰＩカイテンスウマップ It moves to RPM map setting screen.

ＷＡＲＮＩＮＧワーニング It moves to the warning setting screen.

ＳＴＡＬＬＣＨＥＣＫエンストボウシ It moves to the engine stall check screen.

ＣＡＬＩＢＲＡＴＩＯＮキャリブレーション It moves to the RPM calibration screen.

ＲＥＶＳＩＧタコシンゴウ To select the source of the RPM.

ＡＦＳＥＮＳＯＲエアフロセンサ To select the type of A/F sensor.

ＣＯＮＴＲＡＳＴコントラスト To set up the screen contrast.

ＢＲＩＧＨＴバックライト To set up the screen brightness.

ＬＡＮＧＵＡＧＥエイゴ・ニホンゴ To select the language.

ＬＯＣＫソウサロック To set up the Permission/prohibition if wanting to change the

setting.

ＳＴＲＯＢＯザンゾウ To set up the after image of the needle meter.

ＥＡＳＹＳＥＴＵＰカンタンセットアップ It moves to the EASY SETUP setting screen.

ＣＬＯＮＥＣＯＰＹクローンコピー It moves to the data transfer clone creation screen.

ＲＥＳＥＴリセット It moves to the reset screen.

3. Meter screen item list

(1) It is the display item table at each meter screen.

English Japanese Display item

①ＮＥＥＤＬＥＭＥＴＥＲシシンメーター RPM, Air flow voltage, Induction pipe pressure,ＯＰＴ１、ＯＰＴ２

②ＥＬＬＩＰＳＥＭＥＴＥＲダエンメーター RPM, Air flow voltage, Induction pipe pressure,ＯＰＴ１、ＯＰＴ２

③ＢＡＲＧＲＡＰＨバーグラフ RPM, Air flow voltage, Induction pipe pressure,ＯＰＴ１、ＯＰＴ２

④２Ｄ・３ＤＴＲＡＣＥ２Ｄ・３Ｄトレース Airflow compensation rate, 2D/3D trace graph.

⑤ＴＡＣＨＯＭＡＰカイテンスウマップ Airflow compensation rate map classified by the RPM.

Online Manual Not For Resale Purposes