Instruction Manual

GAIN SETTING

Volume Mode

without boost spikes or over boosting. If the gain is set too low the boost response may be poor. If the

gain is set to high there may be boost spikes or overboost.

3- Turn the volume button to set gain.

Recommended gain settings

10D32A 4G63

**This is only a recommendation.

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be

reproduced, stored in retrevial systems, or transmitted in any form or means with out prior written permission of

Blitz Co., Ltd. (Japan).

Channels will flash Turn

Gain is used to adjust boost response. The gain must be set to achieve the quickest boost response

To set gain:

1- Unit must be in either channel 1, 2, 3, 4, or M.

2- Press mode button and hold for three seconds. The unit will beep. Channels 1, 2, 3, 4 and M should flash.

4- Press mode button to exit.

CAUTION -If the gain is set to high it may cause boost spikes or increase boost pressure.

Vehicle Motor Gain

JZA80 2JZGTE 5

MA70 7MGTE 5

SW20 3SGTE 5

FD3S 13BREW 5

FC3S 13BT 5

S13/S14 SR20DET 20

R32,R33 RB26DETT 5

Z32 VG30DETT 5

56G72Z16A

Online Manual Not For Resale Purposes