Full Product Manual

7
TROUBLESHOOTING
How to plug-in your laser projector:
1. Locate the two-copper socket inside the power supply provided.
2. Locate the two-prong side of the cord that comes with the xture and align directly to
the two-copper socket. Insert directly.
3. Secure the water seal and plug it in into any standard AC outlet to turn on the laser
projector.
How to avoid a rotation problem:
If the rotation of your Spright Motion starts and stops
randomly, there is a wireless signal interference (i.e. radio
control toys, remote controls for TV or entertainment
systems, automatic vaccuums, etc.). To verify if this is
the case, please try covering the window at the bottom
of the front lens with your nger to block stray infrared
signals from entering the Spright Motion. If this corrects
the problem, please check the other electronic products
running in the room to determine where the stray signals
are coming from.
TWO-COPPER SOCKET
TWO-PRONG