Installation guide

Configuration Wizard
57
WAP Over Bluetooth Settings
The WAP over Bluetooth service can be used when the BlipNet is used with special “WAP Over
Bluetooth” enabled terminals. Bluetooth Networks has developed WAP over Bluetooth software
for several Sony-Ericsson terminals. With this software it is possible to run a WAP session over
Bluetooth. By writing an application it is even possible to make WAP push functionality over
Bluetooth.
Service Name
This is a free text string, which will be shown as the name of the service on the GUI on a
connecting device.
WAP Gateway IP Address
The IP address of the WAP gateway. By providing this address no configuration of the
connecting WAP Client device is required.
WAP Gateway Type
The gateway type can either be “Origin” or “Proxy”. If the type is set to origin a connecting
WAP client can store WAP bookmarks together with specific Bluetooth device address of the
BlipNode. The “Origin” option shall only be used when just one BlipNode is configured for WAP
over Bluetooth, otherwise the “Proxy” setting shall be used.
WAP Gateway Port Number
The port number, which the WAP client must connect to on the WAP gateway.
Home Page Url