Installation manual

22
IM0001_L2_R_WMv1.3
Calibrating the blink touch screen
The first time you start up the blink charging system, a calibration screen appears, with a small plus
sign (+) in one corner.
To calibrate the touch screen:
1. Touch the plus sign (+).
A plus sign (+) appears in the next corner.
2. Touch the plus sign (+) and repeat three more times as the plus sign moves to the next two corners
and then to the center of the screen.
3. A circle () appears in one corner. Touch the circle. Repeat this step three times as the circle
moves to each corner.
4. A
Calibration Complete message appears in the center of the screen. Touch this message to
continue.
The Welcome to blink screen appears.
Refer to the blink
Wall Mount Charging System Owner’s Manual to learn how to configure and use
the blink charging system.