Installation guide

HIGH POWER WALL CONNECTOR

CONTENTS

SPECIFICATIONS ............................................................................... 2

FEATURES ............................................................................................3

SERVICE WIRING - NORTH AMERICA ......................................4

SERVICE WIRING - EUROPE .........................................................6

INSTALLATION ....................................................................................7

TOOLS REQUIRED.................................................................................................................7

OVERVIEW OF STEPS .........................................................................................................7

STEP ONE - CHECK BOX CONTENTS .........................................................................7

STEP TWO - INSTALL WALL BRACKET .................................................................... 8

STEP THREE - PREPARE CONNECTOR FOR INSTALLATION ....................... 9

STEP FOUR - MOUNT CONNECTOR .........................................................................10

STEP FIVE - CONNECT WIRING ...................................................................................10

STEP SIX - RECONNECT RIBBON CABLE ............................................................... 11

STEP SEVEN - CONFIRM A SUCCESSFUL INSTALLATION .............................11

STEP EIGHT - SET OPERATING CURRENT .............................................................12

STEP NINE - SECURE COVER AND POWER UP ................................................13

TROUBLESHOOTING ..................................................................... 14

MAINTENANCE AND REPAIR .....................................................15

For information on how to charge your Tesla vehicle, refer to the documentation

provided with your vehicle.

IMPORTANT !

READ THIS ENTIRE DOCUMENT BEFORE INSTALLING

OR USING THE HIGH POWER WALL CONNECTOR.

FAILURE TO DO SO OR TO FOLLOW ANY OF THE

INSTRUCTIONS AND WARNINGS IN THIS DOCUMENT

CAN RESULT IN FIRE, ELECTRICAL SHOCK, SERIOUS

INJURY OR DEATH.

THE HIGH POWER WALL CONNECTOR MUST BE

INSTALLED BY A QUALIFIED ELECTRICIAN, AND IN

ACCORDANCE WITH LOCAL ELECTRICAL CODES AND

ORDINANCES.