Installation guide

SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
This document contains important instructions and warnings that must be followed
when installing and maintaining the High Power Wall Connector.
WARNINGS:
The High Power Wall Connector must be grounded through a permanent wiring system or an equipment grounding conductor.
Do not install or use the High Power Wall Connector near flammable, explosive, harsh, or combustible materials, chemicals, or vapors.
Turn off input power at the circuit breaker before installing or cleaning the High Power Wall Connector.
Use the High Power Wall Connector only within the specified operating parameters.
The High Power Wall Connector is designed only for charging a Tesla vehicle (excluding Tesla Roadster). Do not use it for any other purpose or with any other vehicle or object.
Do not use or stop using the High Power Wall Connector if it is defective, appears cracked, frayed, broken or otherwise damaged, or fails to operate.
Do not attempt to open, disassemble, repair, tamper with, or modify the High Power Wall Connector. The High Power Wall Connector is not user serviceable. Contact Tesla for any repairs.
Do not use the High Power Wall Connector when either you, the vehicle or the High Power Wall Connector is exposed to severe rain, snow, electrical storm or other inclement weather.
When transporting the High Power Wall Connector, handle with care and do not subject it to strong force or impact or pull, twist, tangle, drag or step on the High Power Wall Connector to protect
from damage to it or any components.
Protect the High Power Wall Connector from moisture, water, liquid and foreign objects at all times. If any exist or appear to have entered, damaged or corroded the High Power Wall Connector,
do not use the High Power Wall Connector.
Do not touch the High Power Wall Connector’s end terminals with sharp metallic objects, such as wire, tools or needles.
Do not forcefully fold any part of the High Power Wall Connector or damage it with sharp objects.
Do not insert foreign objects into any part of the High Power Wall Connector.
Do not use the High Power Wall Connector when a vehicle cover is on the vehicle.
Use of the High Power Wall Connector may affect or impair the operation of any medical or implantable electronic devices, such as an implantable cardiac pacemaker or an implantable
cardioverter defibrillator. Check with the electronic device manufacturer concerning the effects that charging may have on such electronic device before using the High Power Wall Connector.
CAUTIONS:
Incorrect installation and testing of the High Power Wall Connector could potentially damage either the vehicle’s Battery and/or the High Power Wall Connector itself. Any resulting damage is
excluded from the warranty for both the vehicle and the High Power Wall Connector.
Do not operate the High Power Wall Connector in temperatures outside its operating range of -22°F to 113°F (-30°C to
+45°C).
Ensure that the charge station’s supply cable is positioned so it will not be stepped on, tripped over, or subjected to damage or stress.
Do not use cleaning solvents to clean any of the High Power Wall Connector’s components. The outside of the High Power Wall Connector, the charging cable, and the connector end of the
charging cable should be periodically wiped with a clean dry cloth to remove accumulation of dirt and dust.
Be careful not to damage the circuit board when removing the power entry knock-out.
P/N: 1018667-00-A REV: 1.00