Service manual

㄀ 4 义݅9 义
PRELIMINARY INFORMATION ----- SUBJECT TO CHANGE
Source Current
Source
Current Source(Only AV1/YPbPr/PC need
adjustment)
OK
COLOR TEMP NORMAL NORMAL/COOL/WARM OK
R-GAIN 128 R-GAIN OK
G-GAIN 128 G-GAIN OK
B-GAIN 128 B-GAIN OK
R-OFFSET 128 R-OFFSET OK
G-OFFSET 128 G-OFFSET OK
B-OFFSET 128 B-OFFSET OK
WB INIT WAIT/OK Only for TCL R&D OK
ADC STATUS SUCCESS
/FAIL
The result of ADC auto calibration. OK
3. Design Menu
1. Methods of Entering
Method 1: Using the remote, enter the “Picture” submenu in the OSD; choosing
the “contrast” item and press the 1, 9, 5 and 0 in series, Design Menu will appear in
the left top of screen
Method 2: Press RETURN button when DESIGN HOTKEY is enabled (ON).
2. General introduction˖
'(6,*10(18
ITEMS Default
Setting
Description Status
1-DESIGN
HOTKEY
OFF ON/OFF OK
2-FACTORY
MENU
Enter the Factory Menu. OK
3-SHOP INIT Default setting submenu after production
alignment. refer to **
OK
4-OTHER Miscellaneous. Only for TCL R&DDŽ OK
5-SERVICE
MENU
After service menu ˄refer to page 5˅ OK
6-PARAM
SETTING
Parameter setting submenu OK
7-HOTEL
MENU
Hotel submenu OK
6+23,1,76XEPHQX
ITEMS Default
Setting
Description Status