User's Guide
Table Of Contents
- 1 BlindShell Classic 2 User Guide
- 2 Getting started
- 3 Controlling the phone
- 4 BlindShell functions
- 4.1 Main screen
- 4.2 Call
- 4.3 Messages
- 4.4 Contacts
- 4.5 Applications
- 4.6 Settings
- 4.7 Manual
- 4.8 Turn off the phone
- 4.9 Missed notifications and information about phone status
- 4.10 Favorite applications
- 5 Technical specification
- 6 Regular use and safety information
- 7 Regulatory information
- 7.1 Regulatory information - United States (FCC compliance)
- 7.2 Regulatory information - Canada (ISED Canada compliance)
- 7.3 Regulatory information - EU (Simplified Declaration of Conformity)
- 7.4 Information on disposal for users of WEEE - EU
- 7.5 Restrictions in 5GHz band - EU
- 7.6 Regulatory information - ICASA - South Africa
- 7.7 Regulatory information - ACMA - Australia & New Zealand
- 8 Legal information
11
Text input by voice dictation
While writing a message or other text input, voice dictation can be invoked by
pressing the side action button. After a beep tone, start dictating the text. After
each dictated segment, the phone slightly vibrates. At this moment, text dictation
can be manually nished by pressing the conrm button, back button, or the side
action button. Voice dictation nishes automatically if no text is dictated for a few
seconds.
Time input
While entering time in applications such as Alarm, Calendar, or setting phone’s
time, use numeric keypad buttons to input four time digits. The rst pair of digits
represents hours and the second pair of digits represents minutes.
3.6 Voice control
The phone can be alternatively controlled by voice commands. To invoke voice con
trol, press the side action button. After a beep tone, start dictating the command.
The voice control has the following functionality: - Opening any application by sim
ply saying its name. For example, to open the application messages, start the voice
control and say “messages”. - Dialing contact from the contact list. For example,
to call Michael, start the voice control and say “call Michael”. - Write message to
contact from the contact list. For example, to write a message to Michael, start the
voice control and say “send message to Michael”. Afterward, the text can be inputt
by the numeric keypad or voice dictation.
3.7 SOS button
Long press the SOS button to call the assigned emergency contact. Conrmation
is required. If no contact is assigned to the SOS button, then the long press of the
button opens a menu for assigning an emergency contact.
3.8 File transfer from PC to BlindShell
Windows machines
The phone should be recognized as an external device. Afterward, les can be copied
via any le explorer application from the computer to the phone. If the device is
not recognized by the computer, please install the latest updates and check if there
is an MTP driver present.
11 11
11 11