User Manual

Semi
-Cell
Shades
Fabric
Cellular
&
7
Step 5. How to Operate
Standard Shade
To raise or lower the shade, pull the lift cords down and toward the
center of the shade to release the cord lock. Adjust the shade to the
desired height, and then move the lift cords toward the outside of
the shade to lock in place.
Top-Down Bottom-Up Shade
The cords on the right side of the shade control Bottom-Up/Down
function.
The cords on the left side control Top-Down/Up function.
Operate the cords as described above.
Semi-Cell & Sheer Roman 2-in-1 Shades
The cords on the right side of the shade control the Semi-Cell shade.
The cords on the left side control the Sheer Roman shade.
Operate the cords as described above.
Cordless Shade
Always raise and lower the shade SLOWLY(!) to assure that the
pleated fabric stacks neatly.
To lower the shade: grip the bottom-rail/handle and slowly pull
straight down.
To raise the shade: put one hand under the bottom rail (palm facing
up) and lift slowly until the desired height is reached.
Top-Down Bottom-Up Cordless Shade
To raise and lower the shade from the bottom, follow the directions
above.
To lower and raise the shade from the top: grip the middle rail handle
and slowly pull straight down/up.
Step 6. Installing Hold-Down Brackets
Hold down brackets are provided for optional use. These brackets
should be used only if the shade is to be in a permanently lowered
position. With the shade fully lowered, make pencil marks at the
outside ends of the bottom rail. Brackets should be lined up to the
pencil marks and screwed into place using the 1⁄2” screws. Insert
the pins protruding from the brackets into the holes on both ends of
the bottom rail (see illustration).