Installation Instruction Manual

INSTALLATION

& OPERATING

INSTRUCTIONS

HONEYCOMB

CONTINUOUS

CORD LOOP SHADES

Rev. 03/09 T09-105

The Honeycomb fabric is easy to care for. Regular dusting

with a feather duster or vacuum cleaner brush is

recommended. Most stains can be blotted with a damp

sponge and mild detergent. For problem stains, the shade can

be removed from the Installation brackets and soaked in

warm water.

Important: DO NOT immerse headrail in water. When

damp, raise shade tightly to re-crisp pleats. Before using

anything stronger than mild detergent and lukewarm water,

test an unobtrusive corner of the shade. If you have any

questions, call your dealer for advice.

CLEANING AND CARE

STANDARD

CONTINUOUS

CORD LOOP

SHADES

www.installyourblinds.com

PAGE 1
STANDARD HONEYCOMB CLEANING AND CARE CONTINUOUS CONTINUOUS CORD LOOP CORD LOOP SHADES The Honeycomb fabric is easy to care for. Regular dusting with a feather duster or vacuum cleaner brush is recommended. Most stains can be blotted with a damp sponge and mild detergent. For problem stains, the shade can be removed from the Installation brackets and soaked in warm water. SHADES Important: DO NOT immerse headrail in water. When damp, raise shade tightly to re-crisp pleats.
PAGE 2
OPERATION CONTINUOUS CORD LOOP SHADE BASICS To lower shade, pull down on the back loop of the cord loop. The shade will stop when fully lowered. To raise, pull on the front loop of the cord loop. ATTACHING THE BRACKETS Adjust length or equalization on shades NOTE: Only adjust one cord at a time. Disconnecting more than one cord may allow the cords to retract into the headrail. CLEANING AND CARE If the shade length and equalization is satisfactory, The Honeycomb fabric is easy to care for.