User manual

How to use BLINC
™
III with Your Mobile Phone
1.To answer a call. When the BLINC
™
III headset rings, press the Multi-Function Button (MFB) on the helmet
control unit to answer the incoming call.
2.To terminate a call. Press the Multi-Function Button (MFB) on the helmet control unit to terminate call.
3.To reject a call. When the BLINC
™
III headset rings, press and hold the Multi-Function Button (MFB) on the
helmet control unit until you hear a long beep. Note: this function is valid only if your phone supports
Hands-free Profile.
4.To use voice dialing. If the BLINC™III headset is idle, press and hold the Multi-Function Button (MFB) on
the helmet control unit until you hear a long beep, then release.
5.To use last number redial. If the BLINC™III headset is idle double click the MFB and you will be connected to
the last number dialed.
6.To transfer the sound back to your mobile phone. During a call using your BLINC
™
III headset, press the
Multi-Function Button (MFB) for approximately 2 seconds. If your BLINC
™
III headset works with Headset Profile,
you just need turn down your BLINC
™
III headset.
7.To transfer sound from mobile phone to BLINC
™
III headset.If you make a call using your phone, you can
transfer the sound to the BLINC
™
III headset if the BLINC
™
III headset is on by pressing the Multi-Function
Button (MFB) for about 2 seconds.
8.
Taking a phone call while in intercom mode. While speaking through the intercom function to another
helmet, a phone call will be heard through the helmet speaker. Press the MFB to pick up the phone call and stop
the intercom simultaneously.