User manual

Phone Set-up/Pairing Tips

1. Before selecting “Add new device” on your phone, you need to press and hold the Multi-Function Button

(MFB) on the helmet control unit for approximately 5 seconds until “PAIRING” is displayed on the screen.

2. Click “Add new device” or select “Blue Helmet”

3. Enter Password/PIN “0000”

Note: Follow any further instructions per your phone’s owner’s manual.

To pair the BLINC

™

III Headset with a Phone or Another Device

On the phone enter the “searching for Bluetooth

device mode” and press and hold the Multi-Function Button

(MFB) on the helmet control unit for approximately 5 seconds until “Pairing” is displayed on the screen. The

BLINC

™

III headset password/PIN is 0000. If pairing is successful the display will show “Pairing End” and the phone

icon. Pairing should be done only once. Each time you turn on your BLINC

™

III system, it will be automatically

connected to your phone.

Note: Before enter pairing mode, please make sure other nearby Bluetooth

devices are switched off.

BLINC

™

Password/PIN is 0000