Instruction manual

EN
FR
7
Accept the Pairing
Turn the volume control knob on the
“Driver” helmet MFB until the blue/ red
indicator stops blinking.
Power o “Driver” and “Passenger”
headsets.
Press and hold the MFB for approximately 5 seconds
until a short high tone followed by a
short low tone is heard. Power o both
headsets.
Discovery mode
Press and hold (approx. 6 sec) the MFB on
the “Driver” helmet until the blue/ red
indicator begins to blink
Power ON the Passenger headset
Press and hold the MFB (approx. 3sec)
on the “Passenger” helmet to power it on
until blue indicator lights.
Accept the Pairing
Turn the volume control knob on the
“Passenger” helmet MFB until the blue/ red
indicator stops blinking.
Helmets are now ready for Intercom use
Tap (1 sec) the MFB once on either helmet and 4 seconds later the
other helmet will receive a sound of 3 pulsing ringtones. You are
ready to communicate.
4
5
6
7
8
9