Instruction manual

EN
FR
5
5. Charging the Battery
The headset comes with a built-in rechargeable battery. We recom-
mend that you charge the battery for 4 hours before using the headset
for the rst time.
Use the AC power supply to charge from a power outlet.
Connect your power supply to the charging port as shown above.
While charging, the light indicator (LED near MFB) shows a solid red light.
When the solid red LED light turns o, the battery is fully charged.
A cadent tone will chime on the headset and the indicator red light will
ash rhythmically to indicate that the battery needs to be recharged.
6. Turning your headset on and o
Power On
Press and hold the MFB for approximately 2 seconds until you hear a short
low tone followed by a short high tone. The headset indicator light ashes
blue.
When turned on, the headset automatically establishes hands-free phone
and streaming music connections with the last connected Bluetooth
devices (phone and/or music devices).
Power O
Press and hold the MFB for approximately 5 seconds until you hear a
short high tone followed by a short low tone. The headset indicator light
switches o.
7. Pair it with your phone/ other Bluetooth device
Before using the headset, you need to pair the headset to a phone or
other device.
1. Put the headset in pairing mode
• Make sure the headset is o .
2. Set your Bluetooth device to ‘discover’ mode
• Follow your phone’s instruction guide to discover. This usually
involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your device
and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.*
(Example on smart phone)
Charging port