Owner`s manual

No Power (Blender Will Not Turn On)

• Ensure the unit is plugged into the electrical outlet.

• Check the building’s breaker switch or fuse to ensure it is set to the ON

position.

• Unplug the power cord, and then plug it in again.

Touch Error

The Touch Error message will appear on the LED screen if the space next to or the

side of a control surface button is touched. To avoid this message, touch the center

of the desired button.

Error: Overtemp. Condition Detected

Unplug the blender, and let it cool until the error message is reset. Overtemperature

is caused by extreme use, and continued use may cause permanent damage to the

motor.

Error: Overload Condition Detected

• Remove the jar, and run the blender to determine whether the issue relates to

the jar or the motor.

• With the jar removed, check for blockage in or around the socket on the motor

base and the blade assembly on the jar.

• Reset the error. Touch or cycle the power by unplugging the power cord

and then plugging in the cord again.

• Place the jar securely on the motor base, and touch to pulse the blade

through the mixture.

• Ensure the jar is not loaded with excessively hard or thick ingredients.

Error: Temperature Sensor Not Detected

Error: Zero Crossing Not Detected

Error: Reset Error Detected

Error: Read/Write Error Detected

Error: Motor Control Error Detected

Error: Touch Controller Not Detected

Error: Touch Controller Output Is Invalid

Reset the error. Touch or cycle the power by unplugging the power cord and

then plugging in the cord again.

Signiﬁcant Change in Noise Level

Determine whether the sound is coming from the motor base or the jar.

Motor: Remove the jar from the motor base, and run the motor. If the motor is

excessively noisy, contact Blendtec customer service at 1-800-BLENDTEC

(US customers) or a Blendtec qualiﬁed service agent (international

customers).