User`s manual

7
Cautions: The blender absorbs the surrounding air through the vent under
the motor. Then, the hot air is discharged through the vent on the upper side
of the motor. A sufficient amount of air must be circulated through the lower
part of the motor. and cooled down. You must circulate the hot air and cool it
down. You must not put such light items as vinyl bags and paper cups around
the motor of the blender. (Such items can be absorbed in the motor for the
circulation of the air.)
5. USAGE
51. COMPOSITION OF THE BUTTONS FOR USAGE
• 1 to 5: Each number has the specific program composed of different speed
and cycle.
• P-Pulse Button: While the button is being pressed, constant power with
high speed is applied to the mixture. (This button is mainly used when an
additional mixing is required after the programmed cycle (1 to 5) is used.)
52. BLUE LCD INDICATING SCREEN
Indication of the Currently-
Established Program
Number of the Current
Usage
The Blender Q-Series products have three basic built-in program profiles.
Multi Multi-purpose Program Profile
Smoothie Smoothie Program Profile
Coffee Coffee Program Profile
• The Blue LCD screen indicates the diagnosis of errors and the number of