Operating instructions

14
5.6 LONG-TERM SANITATION OF JAR
1. Sanitize jar per local code by filling the blender jar with a sanitizer diluted to
manufacture’s specifications. Bleach, properly diluted, can be used.
2. Add 1 teaspoon (5 ml) of liquid chlorine bleach.
3. Stir for 10 seconds to mix water and bleach. Let mixture stand in blender jar
for 5 minutes.
4. Empty water/bleach mixture. Store jar as described in Sections 5.4 and 5.5
5.7 CLEANING OF MOTOR BASE
1. Make sure the main power switch is off and blender is unplugged before
cleaning.
2. When necessary, clean the metal top and sides of the blender motor base
with a damp rag. Mild cleaners such as Windex® may be used.
3. Remove the rubber gasket that sits on top of the motor stand, under the top
of the motor base, and clean as needed.
4. If needed, the drive socket can be cleaned using a cotton swab or toothpick.
5.8 CLEANING TIPS AND CAUTIONS
Do not use abrasives to clean the blender motor base, jar, or sound enclosure
as this will dull or scratch the surface.
• Do not use a water jet of any kind to clean this equipment.
• NEVER submerge the blender motor base in water – THIS WILL VOID
WARRANTY
• Avoid submerging the blender jars for more than 5 minutes. Water penetration
through the lower jar seals will reduce the jar life. If jar is stored upside down,
shake excess water from the jar after cleaning.
• For long-term storage of jar, apply a small amount of food-grade oil (such as
vegetable oil) to the seals around the blade assembly, both inside and outside
of the blender jar.