Owner`s manual

54
SECTION 1 – IMPORTANT SAFEGUARDS
IMPORTANT INFORMATION
Read all instructions carefully before using your Professional Series blender.
CERTIFICATIONS
The blender is certified by ETL (Report No. 3018204-4, 3018204-2 &
3018204-3) to comply with UL Standard 982, 6th ed, 6-19-2009, and to
CSA C22.2 No. 195-M1987 2004
The Professional Series and its accessories are certified by NSF International
(NSF) under the letter K (for K-TEC) in the NSF Official Listing.
This important information has been provided as required by the North American standards.
Following these instructions will help prevent injuries and damage to the machine and will
ensure that you have the best possible experience with your Blendtec blender.
1.1 AVOID CONTACT WITH MOVING PARTS
• ALWAYS keep fingers, hands, hair and clothing away from all moving parts.
• ALWAYS keep all utensils away from the drive socket and jar blades during
operation. Metal utensils may damage blade and jar.
• NEVER put hands into the blender jar or add substances by hand when the
jar is on the motor base.
• NEVER touch the blade with your fingers whether or not it is on the motor base.
• NEVER place jar into or remove from drive socket if blender motor is operating.
• DO NOT rock the jar during operation.
1.2 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED
If the blender malfunctions or is damaged in any way, call 1-800-BLENDTEC to
determine how to resolve the situation.
1.3 NEVER OPERATE BLENDER IN LIQUID
Do not put the motor base in water or other liquid. Do not use the blender outdoors
where it is subject to precipitation.
1.4 NEVER PUT NON-FOOD ITEMS INTO JAR
Metal utensils, rocks and glass are dangerous if placed in jar. Damage caused
by such objects will void the warranty. Utensils should be used only when the
blender is off.
1.5 NEVER OPERATE THE BLENDER WITH MORE THAN THE MARKED
CAPACITY OF THE JAR