Owner`s manual

3
1.14 POWER SWITCH
Turn the power switch off when you are finished using the blender� The power
switch (On/Off switch) is located on the back of the blender motor cover�
1.15 MOTOR ADJUSTMENTS AND SERIVCE
Never remove the blender motor cover� The blender motor does not contain
user-adjustable or user-serviceable parts� A Blendtec authorized service
agent must make all service adjustments� Removing the cover or attempting
to service the blender will void the warranty�
1.16 UNIT MALFUNCTION AND DAMAGE
If your blender malfunctions, is dropped, or is damaged in any other way,
stop using the blender and immediately call your Blendtec service agent�
See Section 8 for warranty information�
SECTION 2: UNPACKING
Note: Save all packaging materials and instructions for future use�
2.1 UNPACKING YOUR BLENDER
Your package includes the following:
• Home Blender motor base
• Blender jar with lid
• Fresh Blends recipe book
• Owner’s manual
To unpack your blender:
• Remove the blender motor, blender jar, and jar lid from the packaging�
• Unwind the power cord�
• Check for and remove any packing material that blocks ventilation holes in the
motor base�
• Inspect all items to ensure no damage occurred during shipping�
• If any damage has occurred, contact your Blendtec service agent immediately�
2.2 RECORDING THE SERIAL NUMBER AND DATE OF PURCHASE
Record the blender motor serial number, date of purchase and place of
purchase on the following lines� You will need this information if you contact
Blendtec for service or questions for service�
Motor Serial No� (found on bottom of motor base): ___________________________
Date of Purchase: ________________________________________________________
Place of Purchase:________________________________________________________