Owner`s manual

2
1.6 BLENDER BLADE
The blender blade has blunt edges; however, to avoid the chance of injury
please be careful when adding ingredients to the jar and washing the jar.
1.7 MATERIALS NOT APPROPRIATE FOR USE IN THE BLENDER JAR
Never put metal (e�g�, utensils), rocks or glass in the blender jar� Damage
caused by such materials is not covered under the warranty� Utensils should
only be used in the jar when the motor is not running�
1.8 BLENDER JAR
Ensure the jar is placed securely on the blender base before operating
the blender� Never operate the blender if the jar is filled higher than the
capacity marked on the jar�
1.9 BLENDER LID
To prevent blender ingredients from flying out of the jar and making a mess,
always secure the lid on the blender jar before blending� When blending hot
liquids, the vented lid will release pressure� Be careful not to come in contact
with any steam coming from the lid�
1.10 ATTACHMENTS NOT SOLD BY BLENDTEC
Do not operate the blender with any attachments not made by Blendtec�
Using such attachments may cause fire, electric shock, and injury and will
void the warranty�
1.11 CAUTION ABOUT TOUCHING DRIVE SOCKET AFTER EXTENSIVE USE
The blender drive socket may become hot after numerous cycles� Therefore,
avoid touching the drive socket after using the blender extensively�
1.12 POWER CORD PRECAUTIONS
• Never operate the blender with a damaged cord or plug� If the supply cord is
damaged, it must be replaced by Blendtec or an authorized service agent�
• Do not permit the cord to hang over the edge of the work surface�
• Never use an extension cord with the unit�
• Unplug the blender when not in use, before changing blender locations and
before cleaning�
1.13 LIQUID
To protect against the risk of electrical shock, do not put the motor base in water or any
other liquid� Do not use the blender outdoors, where it might be subject to precipitation�