Owner`s manual

8
ProgrammingBttnX, where X is the number of the selected button�
When the programming is complete, the display will read Program
Complete. The blender will exit the menu mode automatically, and the
quick-access button will be programmed with the new blend cycle� If
the blender fails to assign the new blend cycle to the selected button,
the display will read Program Failed. If you continue to receive this
message after multiple attempts to program the numbered buttons,
contact a Blendtec service agent�
Table 1. Cycle Menu Categories and Blend Cycles
Beverages
Category
Drinks/
Ice Cream
Category
Whole Foods
Category
Food
Processing
Category
Multiuse
Category
Smoothie
Iced
Cappuccino
Granita *Chop (pulse) Slow
XL Smoothie Fruit Drinks Dressings, Dips *Whip (pulse) Medium
Light Juice Milkshake, Ice Batters, Sauces *Puree (pulse) Medium High
Whole Juice Mixed Drinks Frozen Yogurt Knead High
Hot Chocolate Ice Cream
Soups,
Fondues
Grind Grains Fast
*The Chop, and puree options function as pulse cycles�
5.3.4 Restoring Preset Button Defaults
To restore the four cycle buttons to the default settings, press Button 4 and
Start/Stop� The display will read Restoring Defaults� When the programming
is complete, the display will read Restore Complete, indicating the blender
is ready to use�
5.3.5 Accessing Other Blend Cycles
In addition to using the blend cycles assigned to the numbered buttons, you
can access 21 other blend cycles by completing the following steps:
• Access the cycle menu by pressing the Cycle Menu button� Continue
pressing Cycle Menu to scroll through the cycle categories� (See Table
1 for a list of the blend cycles in each category�)
• Once you reach the desired blend cycle category, press Speed Up or
Speed Down to scroll through the blend cycles in the category� When
you find the desired blend cycle, press Start/Stop, which will begin
the blend cycle� The LCD display will show the cycle name and the
time remaining in the blend cycle� contact a Blendtec service agent�