User guide

2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE

Your serial number is located on the bottom of the motor base� Record your blender

motor serial number and date of purchase in the space below� You will need these

when contacting Blendtec for service or questions�

Motor Serial #:___________________________________________________

(Found on bottom of motor base)

Date of Purchase:____________________________________________________

Purchased From:___________________________________________________

2.3 REGISTRATION OF YOUR BLENDER - CANADA ONLY

page�

SECTION 3 - BLENDER OVERVIEW

(Refer to Figures 1 and 2)

3.1 BLENDER MOTOR BASE

Touchpad: Consists of nine buttons that control the blending process� (See Section 6

for more information on the speciﬁc control functions�)

Blender Drive Socket: This is where the jar drive shaft couples with the motor to turn the

blade assembly�

LCD Information Center: Indicates status of unit as well as overload or over-temperature

conditions�

Power Unit: This unit is located with the blender motor and contains the machinery that

runs the blender�

Power Switch: Located on the back lower-right corner of the motor base cover�

Power Cord: Located at the back of the motor base cover�

Motor Base Cover: Houses the power unit in durable, easy-to-clean plastic�

3.2 BLENDER JAR ASSEMBLY

The blender jar assembly consists of the blender jar, blade assembly, and lid�

Jar: Made from a durable BPA-free material to provide maximum efﬁciency and clear

visibility of blender performance�

Lid: Flexible rubber lid seals liquids within the jar during blending� The clear center

piece relieves pressure and allows quick addition of ingredients�

Blade Assembly: Stainless steel; designed to provide fast, consistent blending�