Operation Manual

10
HOT SOUP
This 90-second cycle is designed for hot recipes� The cycle’s length of time,
combined with the speed of the motor, heats the ingredients to a hot temperature�
This cycle can also be used for hot chocolate, syrups, and fondue�
When using fresh ingredients, remember that the speed of the blade generates
enough heat to warm the ingredients Do not add any liquids or ingredients over
115° F to the jar when preparing soups or hot items�
CLEAN
The Clean cycle is a 23-second cycle that automatically cleans the inside of your
blender jar� To use the Clean cycle:
1� Add 1 cup of water and a drop of dish soap to the blender jar
2� Secure the lid and place the jar on the blender base
3� Press the Clean button
4� Once the cycle is complete, remove the jar and rinse
For best results, use the Clean cycle immediately after blending�
PULSE
The Pulse function is used for chopping, mincing, whipping, or other momentary
tasks that do not require a long blend cycle� You can also Pulse to quickly stir a
blend before serving�
The Pulse setting runs at speed 7 and will only run while the Pulse icon remains
pressed� When the icon is released, the motor shuts off�
CAPACITIVE TOUCH SLIDER
The capacitive touch slider allows you to fine-tune the speed of your blender�
Simply slide your finger to the right to increase the blender’s speed or the left to
decrease speed�
5.6 DESIGNER 700
SMOOTHIE
This 40-second cycle is designed specifically for various types of smoothies and
thick drinks that frequently use dense or frozen ingredients� It slows down and
speeds up automatically during the course of the cycle� This allows the blender to
draw the ingredients into the blending vortex, creating the desired texture
To use the Smoothie cycle, load your jar as indicated in the recipe you are using,
secure the lid, and press the Smoothie icon� The blender will run the cycle and
automatically shut off�