Operation Manual

7.3 NOISE LEVEL CHANGES

If the blender noise level has increased from original levels, determine whether the

sound is coming from the blender motor or jar�

• Blender Motor: Remove the pitcher and run blender at highest speed�

• Listen to how the motor sounds� If it is excessively noisy, contact your

Blendtec service center for evaluation�

• Jar: After checking the motor, place the jar back on the motor� Run the motor

for a few seconds using the Pulse button� (If you have more than one jar, test

a different jar to determine whether the sound is different�) If a jar is exces-

sively noisy, or if the blade assembly seems loose or sounds “gravelly” when

turned by hand, contact your Blendtec service center�

7.4 BLENDED TEXTURE UNSATISFACTORY

If the blended texture of product is lumpy or uneven, do the following:

• Ensure the mixture is not cavitating during the cycle� Cavitation is a condition

in which an air pocket forms within the drink mix because the mix is too cold

or too solid� The blender blade then spins freely in this cavity� This problem

can be corrected by increasing the mix temperature by either reducing

ice, increasing liquid and/or ensuring that the frozen ingredients used in the

recipe are never colder than 10 degrees Fahrenheit (-12 degrees Celsius)�

• If the drink is mixing well but has not had enough time for complete blend-

ing, increase cycle time� Try a longer cycle or touch and hold the “Pulse”

button for the required extra blending time�

• TRIED EVERYTHING? If none of the preceding suggestions work, contact

your Blendtec service agent for further assistance�

INSTRUCTIONS THAT APPEAR IN THIS USER GUIDE ARE NOT MEANT TO

COVER EVERY POSSIBLE CONDITION OR SITUATION THAT MAY OCCUR.

GOOD JUDGMENT MUST BE USED WHEN OPERATING THIS OR ANY

OTHER MACHINERY.