Operation Manual

13
7.4 BLENDED TEXTURE UNSATISFACTORY
If the blended texture of product is lumpy or uneven, do the following:
1� Ensure the mixture is not cavitating during the cycle� Cavitation is a condition in which
an air pocket forms within the mix because it is too cold or too solid� The blender
blade then spins freely in this cavity� This problem can be corrected by increasing
the mix temperature by reducing ice, increasing liquid and/or ensuring that the frozen
ingredients used in the recipe are never colder than 10 degrees Fahrenheit
(-12 degrees Celsius)�
1� If the recipe is mixing well but has not had enough time for complete blending,
increase cycle time� Try a longer cycle or touch and hold the Pulse
button for the
required extra blending time�
2� TRIED EVERYTHING? If none of the preceding suggestions work, contact your
Blendtec service agent for further assistance�
INSTRUCTIONS THAT APPEAR IN THIS USER GUIDE ARE NOT MEANT
TO
COVER EVERY POSSIBLE CONDITION OR SITUATION THAT MAY
OCCUR. GOOD JUDGMENT MUST BE USED WHEN OPERATING THIS
OR ANY OTHER MACHINERY.
SECTION 8: WARRANTY
WARRANTY DESCRIPTION
The motor base and jar assembly, including all moving jar parts, are covered
against leaking or breakage for the warranty period� Warranties begin from date
of purchase�
Cosmetic damage, product abuse, unreasonable use, damage resulting from
an accident (including fire, flood, earthquake or other natural disasters), product
tampering, use of accessories not endorsed by Blendtec, service performed or
attempted by unauthorized service agencies, units that have modifications, or
have been or used for commercial purposes are not included under this warranty�
The quality of Blendtec blenders is unsurpassed� You will enjoy years of wonderful
and reliable service from your Blendtec Classic series blender�
THIS WARRANTY APPLIES ONLY TO PRODUCTS SOLD BY BLENDTEC OR ITS
AUTHORIZED DEALERS
LIMITED WARRANTY
Blendtec warrants the blender motor to be free of defect in material and
workmanship for the warranty period� During this period, such defects will be
repaired or the product replaced at Blendtec’s discretion without charge�
This warranty does not cover damage caused by misuse, accident, or negligence�
All implied warranties, including but not limited to implied warranties of fitness and
merchantability, are limited in duration to the warranty period on motor and jar� Any
unit submitted for repair must be accompanied by proof of original purchase and
should be shipped prepaid to: