Operation Manual

2524

4.5 CHEF 600™

Quick Start Guide

1� Toggle the power switch on the back of the motor base�

2� Place the blender jar on the motor base, ensuring the jar is completely seated

and the jar lid is secured�

3� On the control surface, touch the desired speed setting�

Interface

All manual speeds count up to 90 seconds then stop� To stop a blender cycle

before the 90 seconds elapses, press the Stop button�

Pulse Function

The Pulse button is used for chopping, mincing, whipping, or other brief tasks

that do not require a long blend cycle� You can also Pulse to quickly stir a blend

before serving�

For greater ﬂexibility, the Chef 600 offers two different pulse settings�

• Low Pulse: Use for chopping or mixing fragile ingredients

• High Pulse: Use for blending and pureeing�

To use the Pulse function:

• Press the desired Pulse button (Low or High)� The blender will run at the Pulse

setting’s speed while the button is depressed�

• When the pulse button is released, the motor shuts off (unless the button is

held down in the middle of a blend cycle)�

• When using the Pulse setting in the middle of a manual blend cycle, the cycle

speed will resume once the Pulse button is released�

Stop Manual

Speed 1

Manual

Speed 2

Manual

Speed 3

Low Pulse High Pulse

COMMERCIAL LINE DRAWINGS >> WILDSIDE+ JAR

HARDENED METAL

DRIVE SOCKET & MOTOR

BLADE ASSEMBLY

BASE COVER & TOUCH PAD

EASY-CLEAN JAR

CHEF 600™