Blendtec CHEF 775 : Operation Manual : Page 12

2120

4.3 CHEF 775™

Quick Start Guide

1� Touch the power icon to turn on the blender�

2� Place the blender jar on the motor base, ensuring the jar is completely seated

and the jar lid is secured�

3� On the control surface, touch the desired blend cycle icon, pulse icon or desired

location on the slider control bar�

4� Touch the cancel/exit icon to stop a blend cycle or manual operation before the

programmed time elapses�

One-Touch Controls

Operating the Chef 775 couldn’t be easier� Presets for Small, Medium and Large

beverages make it easy for anyone to operate with little training� Each setting shuts off

automatically, and a Pulse button provides a quick burst of needed speed and power�

8-Speed Capacitive Touch Slider + Pulse

The capacitive touch slider provides seamless precision speed control; simply slide your

ﬁnger to adjust your blender’s speed� The Pulse function adds a burst of speed and power�

“Add 10” Function

The “Add 10” icon allows users to add 10-second intervals to blend cycles, providing

completely customized blends� It also acts as a stand-alone 10-second cycle�

Chef Series Proﬁle Conﬁguration

Changing proﬁle conﬁgurations on the Chef Series blenders can be done within the

ﬁrst 10 seconds after the blender is plugged in� The blender proﬁle is conﬁgured by

holding a speciﬁc combination of 3 buttons (shown below) for 2�5 seconds within the

10 second window after plugging in and powering on the blender into ready mode�

Multipurpose 1 Proﬁle �� Cancel, Small, Medium

Multipurpose 2 Proﬁle �� Cancel, Medium, Large

Multipurpose 3 Proﬁle �� Cancel, Large, +10

Once conﬁgured, the proﬁle will be displayed for 1 second before returning to

ready mode�

bt_1 = Multipurpose 1: best for blended coffee and pour over ice smoothies

bt_2 = Multipurpose 2: best for whole fruit and frozen fruit smoothies

bt_3 = Multipurpose 3: best for thick blends and milkshakes

Preprogrammed Cycle Buttons

Power

PulseSlider Control Bar

Cancel/Exit

HARDENED METAL

DRIVE SOCKET & MOTOR

MOTOR BASE

BLADE ASSEMBLY

EASY-CLEAN JAR

TOP COVER & TOUCH PAD

CHEF 775™