User Manual

10
The Classic 575 comes with five incremental speed cycles that allow you to
completely customize the consistency of your blend� Each manual cycle is 50
seconds long and blends at the following speeds:
• Lo: Speed 1
• Medium-lo: Speed 3
• Medium: Speed 5
• Medium-hi: Speed 7
• Hi: Speed 9
You can switch to a different speed at any point during the cycle�
PULSE
The Pulse function is used for chopping, mincing, whipping, or other momentary
tasks that do not require a long blend cycle� You can also Pulse to quickly stir
a blend before serving�
The Pulse setting runs at speed 7 and will only run while the Pulse icon
remains pressed� When the icon is released, the motor shuts off�
5.7 FIT BY BLENDTEC™
ONE-TOUCH TIMED CYCLES
The Fit by Blendtec comes equipped one-touch timed cycles� This cycle frees
your hands for other kitchen tasks and are ideal for recipes that require longer
blending times�
+10
This +10 icon allows users to add 10-second intervals to their blend cycles� It
also acts as a stand-alone, 10-second cycle� To use this feature, simply touch it
once at any point during the cycle�
LOW PULSE
The Pulse function is used for chopping, mincing, whipping, or other momentary
tasks that do not require a long blend cycle� You can also Pulse to quickly stir
a blend before serving�
HIGH PULSE
The Pulse function is used for chopping, mincing, whipping, or other momentary
tasks that do not require a long blend cycle� You can also Pulse to quickly stir
a blend before serving�
STOP
Used to manually stop blend cycle�