User Manual

ManualsBrandsBlendtec ManualsBlendersClassic Fit Blender with FourSide Jar (75 oz), 30-sec Pre-programmed cycle, High-Low Pulse, Professional-Grade Power, Black

CLASSIC SERIES

OWNER’S MANUAL AND USER GUIDE

Summary of content (19 pages)

PAGE 1
CLASSIC SERIES OWNER’S MANUAL AND USER GUIDE 1
PAGE 2
TABLE OF CONTENTS SECTION 1 - IMPORTANT SAFEGUARDS ��1 SECTION 2 - UNPACKING ��3 SECTION 3 - GETTING TO KNOW YOUR BLENDER ��3 SECTION 4 - INSTALLATION ��4 SECTION 5 - OPERATIONAL OVERVIEW ��
PAGE 3
SECTION 1: IMPORTANT SAFEGUARDS IMPORTANT INFORMATION Read all instructions carefully before using your Classic series blender. Following these instructions will help prevent injuries and damage to the machine and will ensure that you have the best possible experience with your Classic series blender. 1.1 AVOID CONTACT WITH MOVING PARTS • ALWAYS keep fingers, hands, hair and clothing away from all moving parts.
PAGE 4
1.9 WARNING, DO NOT BLEND HOT/LIQUIDS OR OTHER HOT INGREDIENTS Starting blend cycles with boiling or very hot liquids may result in burns or cause the lid to blow off. 1.10 USE CAUTION WHEN BLENDING ON THE HOT SOUP CYCLE When blending on the Hot/Soup cycle, friction of the blade will heat the contents. The vented lid will allow pressure relief. Be careful not to come in contact with any steam coming from the clear center lid. 1.11 POWER CORD PRECAUTIONS • NEVER operate with a damaged cord or plug.
PAGE 5
SECTION 2: UNPACKING SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE 2.1 UNPACKING YOUR BLENDER You should have received the following items: • Classic series motor base • Blender jar with lid • Blendtec 101 booklet • Customer Service and Warranty Registration Card Additional literature may be included depending on package configuration. 1. Remove blender motor base, blender jar, and lid from packaging. 2. Unwind the power cord. 3.
PAGE 6
3.2 BLENDER JAR The blender jar consists of the blender jar, blade assembly, and lid. • Jar: Durable, BPA-free jar; easy to clean. • Blade Assembly: Uniquely designed stainless steel blade provides fast, consistent blending. • Lid: Vented gripper lid seals liquids within the jar during blending. NOTE: Filling the blender jar beyond the marked capacity is not recommended. SECTION 4: INSTALLATION 1. Place the blender on a flat, clean, and dry surface.
PAGE 7
5
PAGE 8
SECTION 5: OPERATIONAL OVERVIEW 5.1 QUICK RECIPE INSTRUCTIONS – Use these steps to get started right away. 1. Choose a recipe from the included Blendtec Blending 101 booklet. 2. Gather all of the ingredients. 3. Load the blender jar as indicated in the recipe. 4. Plug in the blender. 5. Attach the blender lid to the jar; ensure that it sits on the jar completely. 6. Turn on the main power switch located on the back of the blender motor base. 7.
PAGE 9
5.3 CLASSIC 475™ SMOOTHIE This cycle is designed specifically for various types of smoothies and thick drinks that frequently use dense or frozen ingredients. It slows down and speeds up automatically during the course of the cycle. This allows the blender to draw the ingredients into the blending vortex, creating the desired texture. INCREMENTAL SPEEDS The Classic 475 comes with three incremental speed cycles that allow you to completely customize the consistency of your blend.
PAGE 10
completely customize the consistency of your blend. Each manual cycle is 50 seconds long and blends at the following speeds: • Lo: Speed 1 • Medium: Speed 5 • Medium-hi: Speed 7 • Hi: Speed 9 You can switch to a different speed at any point during the cycle. PULSE The Pulse function is used for chopping, mincing, whipping, or other momentary tasks that do not require a long blend cycle. You can also Pulse to quickly stir a blend before serving.
PAGE 11
the speed of the motor, heats the ingredients to a hot temperature. This cycle can also be used for hot chocolate, syrups, and fondue. When using fresh ingredients, remember that the speed of the blade generates enough heat to warm the ingredients Do not add any liquids or ingredients over 115° F (46° C) to the jar when preparing soups or hot items. PULSE The Pulse function is used for chopping, mincing, whipping, or other momentary tasks that do not require a long blend cycle.
PAGE 12
The Classic 575 comes with five incremental speed cycles that allow you to completely customize the consistency of your blend. Each manual cycle is 50 seconds long and blends at the following speeds: • Lo: Speed 1 • Medium-lo: Speed 3 • Medium: Speed 5 • Medium-hi: Speed 7 • Hi: Speed 9 You can switch to a different speed at any point during the cycle. PULSE The Pulse function is used for chopping, mincing, whipping, or other momentary tasks that do not require a long blend cycle.
PAGE 13
5.8 TOTAL BLENDER™ BATTERS/DIPS This cycle stays at relatively low speeds for shorter periods of time. This combines your dips, allowing the flavors to blend together properly, without over-mixing. MIXED DRINKS This cycle is used for mixed drinks, milkshakes, iced coffees, and milkshakes. This length of time creates a consistency that is ideal for these types of recipes.
PAGE 14
SECTION 6: CARE AND CLEANING 6.1 CLEANING AFTER USE 1. Add 1 cup (240ml) of hot water and a drop of liquid dish washing soap to the blender jar. 2. Place the lid tightly onto the jar. 3. Place the blender jar on the blender base and, with your hand placed on top of the lid, the Pulse button for 5 seconds or press the Clean cycle button which is available on select models. 4. Rinse well. 5. Clean the blender base by simply wiping the base and interface with a damp cloth. 6.2 LONG-TERM SANITATION 1.
PAGE 15
cord back in. 7.2 ERROR MESSAGES ON DISPLAY Overload: This message indicates an overload on the motor. Turn off and unplug the unit. Remove the blender jar from the motor base, and turn the shaft by hand to ensure the blade turns freely. If the blade does not move freely, check for any obstruction in the jar. If the blade moves freely, plug in the unit and turn the blender on. If the overload condition reoccurs, please contact your Blendtec Service Agent for further assistance.
PAGE 16
INSTRUCTIONS THAT APPEAR IN THIS USER GUIDE ARE NOT MEANT TO COVER EVERY POSSIBLE CONDITION OR SITUATION THAT MAY OCCUR. GOOD JUDGMENT MUST BE USED WHEN OPERATING THIS OR ANY OTHER MACHINERY. SECTION 8: WARRANTY WARRANTY DESCRIPTION The motor base and jar assembly, including all moving jar parts, are covered against leaking or breakage for the warranty period. Warranties begin from date of purchase.
PAGE 17
Mexico South Korea Spain Taiwan United Kingdom 001-855-230-0888 003-081-32941 900-948733 008-01147146 0800-1510183 The above limitations may not apply in states where limited warranties are not allowed. Other warranties may apply outside of the USA and Canada. Using a machine outside the country it was designed for will void the warranty. UNDER WARRANTY 1. Contact Blendtec immediately to diagnose the difficulty. Please have blender serial number ready as well as a description of the problem.
PAGE 18
OUT OF WARRANTY 1. Contact Blendtec to diagnose the difficulty. Please have the blender serial number ready along with a description of the problem. Do not attempt to do your own repairs. Many issues can be resolved simply and quickly over the phone. 2.