User Guide

1312
Secure Blender Feature
When creating or modifying a profile via the Blend Wizard, one of the options is
to secure the blender� If you select this option, once you have downloaded the
profile to a USB drive and then imported the profile to the blender, some of the
advanced programming functions will be disabled�
The secured profile will be the active profile on the blender, another profile
cannot be made the active profile and a new profile cannot be imported to
the blender (unless it was created via your Blend Wizard account)� Additionally,
the blend cycles in the profile cannot be changed on the blender, and the
Enclosure Safety Mode, Screen Standby Time, Blend Cycle Pause and Slider
Lockout settings cannot be modified�
To unlock these features, complete the following steps:
1� Log on to your Blend Wizard account at my�blendtec�com�
2� Edit the secured profile, selecting the option to turn off the secure blender
mode, or create a new profile with the secure blender mode turned off�
3� Import the profile to a USB drive, and then follow the instructions to import the
file to the blender�
Exporting and Transferring Profiles
To export profiles and transfer them to the Blend Wizard, complete the
following steps:
1� Ensure the profile you want to export is the active profile on the blender�
2� Use a Phillips screwdriver to remove the USB cover at the top of the right side of
the blender�
3� Plug the USB flash drive into the blender’s USB port�
Note: If the blender is in manual or automatic operation mode, the USB
flash drive menu will automatically load on the screen. If the blender is in
programming mode, go to the main menu and select USB Flash Drive.
4� Use the scroll button to find Export Active Profile and press the select button�
Note: If the USB flash drive the file is being exported to does not already
contain the sth-prof.bpf file, the LED screen will display the question, “Export
profile to the sth-prof.bpf file?” Press the select button to start the export
process. Press the cancel/exit button to return to the previous menu.
If the USB flash drive the file is being exported to already contains the
sth-prof.bpf file, the LED screen will display the question, “Export profile and
overwrite the sth-prof.bpf file?” If you want to overwrite the file on the USB
flash drive, press the select button to start the export process. If you do not
want to overwrite the file on the USB flash drive, press the cancel/exit button
to cancel the export.
5� After the export is complete, remove the USB flash drive and secure the cover
on the USB port with a Phillips screwdriver�
6� Insert the USB flash drive into a computer, and log in to the Blend Wizard
(my�blendtec�com)� Follow the instructions on the site to transfer the profile to
your account�
4.1.10 Blender Settings
You can change various blender settings for optimal blending performance and
function based on your needs�
Enclosure Safety Mode
The enclosure safety feature prompts you to ensure the sound enclosure lid
is closed during motor operation� It will also turn off the motor if you raise the
sound enclosure during blending�
To enable or disable the enclosure safety feature, complete the following steps:
1� Press and hold the cancel/exit button for 3 seconds�
2� Use the scroll button and then select Settings from the menu by touching the
select button�
3� Use the select button to choose the Enclosure Safety Mode�
4� Use the select button to toggle between disabling and enabling the enclosure
safety feature�
5� Press the cancel/exit button to return to the previous menu�
Screen Standby Time
You can adjust the length of time before the blender switches to standby mode
(15 minutes, 1 hour, 6 hours or 12 hours)�
To select a new standby time, complete the following steps:
1� Press and hold the cancel/exit button for 3 seconds�
2� Use the scroll button and then select Settings from the menu by touching the
select button�
3� Use the scroll button and then select Screen Standby from the menu by
touching the select button�
4� Use the scroll button to find your desired standby time, then press select�
5� Press the cancel/exit button to return to the previous menu�