User Guide

1918

In-Counter Installation

• Feed the electrical cord through the hole in the countertop�

• Gently place the blender unit into the hole�

• Ensure the gasket is seated correctly, lying ﬂat against the counter surface and

not pinched by the housing�

• Plug the unit into an outlet with appropriate electrical protection�

Quick Start Guide

1� Turn on the blender by toggling the power switch on the front of the blender�

2� Raise the sound enclosure lid�

3� Place the blender jar on the motor base, ensuring the jar is completely seated

and the jar lid is secured�

4� Close the sound enclosure lid�

5� On the touchpad, press the desired blend cycle number or pulse icon�

6� Push any blend cycle button to stop a blend cycle before the programmed

time elapses�

Automatic Cycle Operation

Your Connoisseur blender is preprogrammed with multiple blender proﬁles, to help

operators achieve consistent blends with a minimum of training, trial and error�

You can select from the following proﬁles and blend cycles:

Multipurpose Proﬁle*

Button 1: Small Milkshake

Button 2: Granita / Medium Milkshake

Button 3: Small Margarita / Ice Cappuccino

Button 4: Medium Smoothie 4

Button 5: Large Smoothie 4

Button 6: Pulse

*When you turn the blender on for the ﬁrst time this will be the default proﬁle�

Preprogrammed Cycles

For a complete list of preprogrammed proﬁles or cycles and instructions on how

to program and change proﬁles or cycles, please visit blendtec�com

Pulse Function

The Pulse button is used for chopping, mincing, whipping or other momentary

tasks that do not require a long blend cycle� You can also use the Pulse button

to quickly stir a blend before serving�

The Pulse setting runs at speed 7 and will only run while the Pulse button is held

down� When the button is released, the motor shuts off�

Preprogrammed Cycle Buttons Pulse

Figure 5. Counter space for Connoisseur 825

3” (7�6 cm)

Minimum

clearance

¾” (1�9 cm)

Maximum

thickness