Owner's Manual
PART# BRD-2032
®
=r
Innovative
Mounting
Solutions
STEP 3 • While sitting in the passenger seat, place the mount over
the mirror stem. Tighten the CLAMP SCREW until the mount starts to
clamp onto the mirror stem. Position the mount as far forward as it will
go
and paralell to the bottom
of
the mirror before fully tightening.
PIVOT POINT
TOPANDMID
SECTIONS MUST TOUCH
AT THE PIVOT POINT
BEFORE CLAMP SCREW
IS FULLY TIGHTENED
STEP 4 •
MAKE
SURE THE TOP
AND
MID SECTIONS
ARE TOUCHING
AT
THE PIVOT POINT.
If
you can not get
them to touch at the pivot point, you have an incompatible
mirror type for this mount.
PIVOT
ADJUSTMENT
STEP 5 • Reinstall the BODY ASSEMBLY. Be sure to include the
lock washer with the top socket head screw and the lock and flat
washer with the bottom socket head screw as shown above. NOTE:
there are extra lock and flat washers included
In
the tool kit just in
case you happen to misplace one.
STEP 6 - Install your radar detector onto the mount. Use the ad-
justments shown above to adjust the RD to your desired position.
We recommend adjusting the RD as close to the bottom
of
your
mirror as you can. Be sure to tighten all adjustment screws after the
adjustments are made.
CAUTION
DO NOT use this mount if it interferes with the adjustability
or
the operation
of
your rear view mirror in any way.
DO NOT use this mount
if
the radar detector creates an unsafe viewing obstruction.
DO NOT ATTEMPT TO MODIFY THIS PRODUCT. Consult the manufacturer for assistance.
All Blend Mo Jnt products are accompanied with detailed installation instructions and adjustment tips.
You
are encouraged to contact customerser rice@blend-
mount.com
or
call J28 Design
at
1-888-497-8388 for further assistance.
Check the BlendMount Forum
for
installation tips and some vehicle specific installs. Your feedback is very important to us. Please email any questions
or
www.blendmount.com comments you have to customerservlc @blendmount.com
Innovative Design And
Pree/.
Ion
Manufacturing
PAGE20F2
BlendMount - US PATENT# 0625,580
S,
0656,811 S, 0653,980 S
and other patents pending